phschoen
/
ESPuino
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

rework actual codebase for rfid via i2c

master
kkloesener 4 years ago
parent
34e7ae858f
commit
03e9d52e7d
3 changed files with 29 additions and 22 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 11
      src/main.cpp
  2. 24
      src/settings-espa1s.h
  3. 16
      src/settings.h

11
src/main.cpp
View File

@ -266,7 +266,7 @@ TaskHandle_t fileStorageTaskHandle;
static TwoWire i2cBusTwo = TwoWire(1);
#endif
#ifdef RFID_READER_TYPE_MFRC522_I2C
static MFRC522 mfrc522(MFRC522_ADDR, MFRC522_RST_PIN, i2cBusTwo);
static MFRC522 mfrc522(MFRC522_ADDR, MFRC522_RST_PIN, &i2cBusTwo);
#endif
#ifdef PORT_EXPANDER_ENABLE
@ -276,7 +276,7 @@ TaskHandle_t fileStorageTaskHandle;
#if (HAL == 2)
#include "AC101.h"
static TwoWire i2cBusOne = TwoWire(0);
static AC101 ac(i2cBusOne);
static AC101 ac(&i2cBusOne);
#endif
#ifdef RFID_READER_TYPE_MFRC522_SPI
static MFRC522 mfrc522(RFID_CS, RST_PIN);
@ -1852,8 +1852,7 @@ void rfidScanner(void *parameter) {
if (!mfrc522.PICC_ReadCardSerial()) {
continue;
}
//mfrc522.PICC_DumpToSerial(&(mfrc522.uid));
// mfrc522.PICC_DumpToSerial();
mfrc522.PICC_HaltA();
mfrc522.PCD_StopCrypto1();
@ -4746,7 +4745,8 @@ void setup() {
loggerNl(serialDebug, (char *) FPSTR(rfidScannerReady), LOGLEVEL_DEBUG);
#endif
#ifdef RFID_READER_TYPE_MFRC522_SPI
// Init RC522 Card-Reader
#if defined(RFID_READER_TYPE_MFRC522_I2C) || defined(RFID_READER_TYPE_MFRC522_SPI)
mfrc522.PCD_Init();
mfrc522.PCD_SetAntennaGain(rfidGain);
delay(50);
@ -5061,6 +5061,7 @@ void setup() {
#ifdef BUTTON_5_ENABLE
pinMode(BUTTON_5, INPUT_PULLUP);
#endif
unsigned long currentTimestamp = millis();
// Init rotary encoder

24
src/settings-espa1s.h
View File

@ -22,14 +22,18 @@
#endif
// RFID (via SPI; currently not supported)
#define RST_PIN 99 // Not necessary but has to be set anyway; so let's use a dummy-number
#define RFID_CS 21 // GPIO for chip select (RFID)
#define RFID_MOSI 23 // GPIO for master out slave in (RFID)
#define RFID_MISO 19 // GPIO for master in slave out (RFID)
#define RFID_SCK 18 // GPIO for clock-signal (RFID)
#if defined(RFID_READER_TYPE_MFRC522_SPI)
#define RST_PIN 99 // Not necessary but has to be set anyway; so let's use a dummy-number
#define RFID_CS 21 // GPIO for chip select (RFID)
#define RFID_MOSI 23 // GPIO for master out slave in (RFID)
#define RFID_MISO 19 // GPIO for master in slave out (RFID)
#define RFID_SCK 18 // GPIO for clock-signal (RFID)
#endif
// RFID (via I2C)
#define MFRC522_RST_PIN 12 // needed for i2c-comm MTDI on JTAG
#if defined(RFID_READER_TYPE_MFRC522_I2C)
#define MFRC522_RST_PIN 12 // needed for initialisation -> MTDI on JTAG header
#endif
// I2C-configuration (necessary for RC522 [only via i2c - not spi!] or port-expander)
#if defined(RFID_READER_TYPE_MFRC522_I2C) || defined(PORT_EXPANDER_ENABLE)
@ -59,7 +63,7 @@
// Control-buttons (set to 99 to DISABLE; 0->39 for GPIO; 100->115 for port-expander)
#define NEXT_BUTTON 199 // Button 0: GPIO to detect next
#define PREVIOUS_BUTTON 198 // Button 1: GPIO to detect previous (Important: as of 19.11.2020 changed from 33 to 2; make sure to change in SD-MMC-mode)
#define PREVIOUS_BUTTON 198 // Button 1: GPIO to detect previous
#define PAUSEPLAY_BUTTON 36 // Button 2: GPIO to detect pause/play
#define BUTTON_4 99 // Button 4: unnamed optional button
#define BUTTON_5 99 // Button 5: unnamed optional button
@ -67,13 +71,15 @@
// Wake-up button => this also is the interrupt-pin if port-expander is enabled!
// Please note: only RTC-GPIOs (0, 4, 12, 13, 14, 15, 25, 26, 27, 32, 33, 34, 35, 36, 39, 99) can be used! Set to 99 to DISABLE.
// Please note #2: this button can be used as interrupt-pin for port-expander. If so, all pins connected to port-expander can wake up ESPuino.
#define WAKEUP_BUTTON DREHENCODER_BUTTON // Defines the button that is used to wake up ESPuino from deepsleep.
#define WAKEUP_BUTTON PAUSEPLAY_BUTTON // Defines the button that is used to wake up ESPuino from deepsleep.
// Power-control
#define POWER 19 // GPIO used to drive transistor-circuit, that switches off peripheral devices while ESP32-deepsleep
// (optional) Neopixel
#define LED_PIN 23 // GPIO for Neopixel-signaling
#if defined(NEOPIXEL_ENABLE)
#define LED_PIN 23 // GPIO for Neopixel-signaling
#endif
// (optinal) Headphone-detection
#ifdef HEADPHONE_ADJUST_ENABLE

16
src/settings.h
View File

@ -25,30 +25,30 @@
//########################## MODULES #################################
//#define PORT_EXPANDER_ENABLE // When enabled, buttons can be connected via port-expander PCA9555
#define MDNS_ENABLE // When enabled, you don't have to handle with ESPuino's IP-address. If hostname is set to "ESPuino", you can reach it via ESPuino.local
#define MQTT_ENABLE // Make sure to configure mqtt-server and (optionally) username+pwd
//#define MQTT_ENABLE // Make sure to configure mqtt-server and (optionally) username+pwd
#define FTP_ENABLE // Enables FTP-server; DON'T FORGET TO ACTIVATE AFTER BOOT BY PRESSING PAUSE + NEXT-BUTTONS (IN PARALLEL)!
#define NEOPIXEL_ENABLE // Don't forget configuration of NUM_LEDS if enabled
//#define NEOPIXEL_ENABLE // Don't forget configuration of NUM_LEDS if enabled
//#define NEOPIXEL_REVERSE_ROTATION // Some Neopixels are adressed/soldered counter-clockwise. This can be configured here.
#define LANGUAGE 1 // 1 = deutsch; 2 = english
//#define STATIC_IP_ENABLE // Enables static IP-configuration (change static ip-section accordingly)
//#define HEADPHONE_ADJUST_ENABLE // Used to adjust (lower) volume for optional headphone-pcb (refer maxVolumeSpeaker / maxVolumeHeadphone)
#define SHUTDOWN_IF_SD_BOOT_FAILS // Will put ESP to deepsleep if boot fails due to SD. Really recommend this if there's in battery-mode no other way to restart ESP! Interval adjustable via deepsleepTimeAfterBootFails.
#define MEASURE_BATTERY_VOLTAGE // Enables battery-measurement via GPIO (ADC) and voltage-divider
//#define MEASURE_BATTERY_VOLTAGE // Enables battery-measurement via GPIO (ADC) and voltage-divider
//#define PLAY_LAST_RFID_AFTER_REBOOT // When restarting ESPuino, the last RFID that was active before, is recalled and played
//#define USE_LAST_VOLUME_AFTER_REBOOT // Remembers the volume used at last shutdown after reboot
#define USEROTARY_ENABLE // If rotary-encoder is used (don't forget to review WAKEUP_BUTTON if you disable this feature!)
//#define USEROTARY_ENABLE // If rotary-encoder is used (don't forget to review WAKEUP_BUTTON if you disable this feature!)
#define BLUETOOTH_ENABLE // If enabled and bluetooth-mode is active, you can stream to your ESPuino via bluetooth (a2dp-sink).
//#define IR_CONTROL_ENABLE // Enables remote control
//################## select SD card mode #############################
//#define SD_MMC_1BIT_MODE // run SD card in SD-MMC 1Bit mode
//#define SINGLE_SPI_ENABLE // If only one SPI-instance should be used instead of two (not yet working!) (Works on ESP32-A1S with RFID via I2C)
//#define SINGLE_SPI_ENABLE // If only one SPI-instance should be used instead of two (not yet working!)
//################## select RFID reader ##############################
#define RFID_READER_TYPE_MFRC522_SPI // use MFRC522 via SPI
//#define RFID_READER_TYPE_MFRC522_I2C // use MFRC522 via I2C
//#define RFID_READER_TYPE_MFRC522_SPI // use MFRC522 via SPI
#define RFID_READER_TYPE_MFRC522_I2C // use MFRC522 via I2C
//#define RFID_READER_TYPE_PN5180 // use PN5180
#ifdef RFID_READER_TYPE_MFRC522_I2C
@ -59,7 +59,7 @@
//#define PN5180_ENABLE_LPCD // Wakes up ESPuino if RFID-tag was applied while deepsleep is active.
#endif
#ifdef RFID_READER_TYPE_MFRC522_SPI
#if defined(RFID_READER_TYPE_MFRC522_I2C) || defined(RFID_READER_TYPE_MFRC522_SPI)
uint8_t rfidGain = 0x07 << 4; // Sensitivity of RC522. For possible values see reference: https://forum.espuino.de/uploads/default/original/1X/9de5f8d35cbc123c1378cad1beceb3f51035cec0.png
#endif

Write Preview
Loading…
Cancel
Save