phschoen
/
ESPuino
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

PCB Lolin D32 (correction)

master
Torsten Stauder 5 years ago
parent
a130658dca
commit
9e39a58fe4
1 changed files with 0 additions and 1 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Unified View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 1
      PCBs/Wemos Lolin D32/README.md

1
PCBs/Wemos Lolin D32/README.md
View File

@ -20,7 +20,6 @@ This PCB is not yet tested!
* Chane `VOLTAGE_READ_PIN` to 35. * Chane `VOLTAGE_READ_PIN` to 35.
## Things to mention ## Things to mention
* RFID: In order to avoid buying a 6pin-JST-PH-connector I used 2x3pin. This is because I already had ten of them (see link below). Accidently, on my PCB-layout, I switched the direction of one of these two connectors. However, it's just an visual issue.
* Better don't solder Lolin D32 directly to the PCB. I recommend to make use of female connectors instead (link below). * Better don't solder Lolin D32 directly to the PCB. I recommend to make use of female connectors instead (link below).
* When ordering a LiPo-battery, make sure to use [one](https://www.eremit.de/p/eremit-3-7v-2500mah-lipo-104050-jst-ph-2-0mm) with deep discharge protection! This is really really really important!!! * When ordering a LiPo-battery, make sure to use [one](https://www.eremit.de/p/eremit-3-7v-2500mah-lipo-104050-jst-ph-2-0mm) with deep discharge protection! This is really really really important!!!

Write Preview
Loading…
Cancel
Save