You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
138 lines
8.4 KiB
138 lines
8.4 KiB
#include "Arduino.h"
|
|
|
|
//######################### INFOS ####################################
|
|
// This is the general configfile for Tonuino-configuration.
|
|
|
|
//################## HARDWARE-PLATFORM ###############################
|
|
/* Make sure to also edit the configfile, that is specific for your platform.
|
|
If in doubts (your develboard is not listed) use HAL 1
|
|
1: Wemos Lolin32 => settings-lolin32.h
|
|
2: ESP32-A1S Audiokit => settings-espa1s.h
|
|
3: Wemos Lolin D32 => settings-lolin_D32.h
|
|
4: Wemos Lolin D32 pro => settings-lolin_D32_pro.h
|
|
more to come...
|
|
*/
|
|
#define HAL 1 // HAL 1 = LoLin32, 2 = ESP32-A1S-AudioKit, 3 = Lolin D32, 4 = Lolin D32 pro
|
|
|
|
|
|
//########################## MODULES #################################
|
|
#define MDNS_ENABLE // When enabled, you don't have to handle with Tonuino's IP-address. If hostname is set to "tonuino", you can reach it via tonuino.local
|
|
#define MQTT_ENABLE // Make sure to configure mqtt-server and (optionally) username+pwd
|
|
#define FTP_ENABLE // Enables FTP-server; DON'T FORGET TO ACTIVATE AFTER BOOT BY PRESSING PAUSE + NEXT-BUTTONS (IN PARALLEL)!
|
|
#define NEOPIXEL_ENABLE // Don't forget configuration of NUM_LEDS if enabled
|
|
//#define NEOPIXEL_REVERSE_ROTATION // Some Neopixels are adressed/soldered counter-clockwise. This can be configured here.
|
|
#define LANGUAGE 1 // 1 = deutsch; 2 = english
|
|
//#define STATIC_IP_ENABLE // Enables static IP-configuration (change static ip-section accordingly)
|
|
//#define HEADPHONE_ADJUST_ENABLE // Used to adjust (lower) volume for optional headphone-pcb (refer maxVolumeSpeaker / maxVolumeHeadphone)
|
|
#define SHUTDOWN_IF_SD_BOOT_FAILS // Will put ESP to deepsleep if boot fails due to SD. Really recommend this if there's in battery-mode no other way to restart ESP! Interval adjustable via deepsleepTimeAfterBootFails.
|
|
#define MEASURE_BATTERY_VOLTAGE // Enables battery-measurement via GPIO (ADC) and voltage-divider
|
|
//#define PLAY_LAST_RFID_AFTER_REBOOT // When restarting Tonuino, the last RFID that was active before, is recalled and played
|
|
//#define USE_LAST_VOLUME_AFTER_REBOOT // Remembers the volume used at last shutdown after reboot
|
|
|
|
//#define BLUETOOTH_ENABLE // Doesn't work currently (so don't enable) as there's not enough DRAM available
|
|
|
|
|
|
//################## select SD card mode #############################
|
|
//#define SD_MMC_1BIT_MODE // run SD card in SD-MMC 1Bit mode
|
|
//#define SINGLE_SPI_ENABLE // If only one SPI-instance should be used instead of two (not yet working!) (Works on ESP32-A1S with RFID via I2C)
|
|
|
|
|
|
//################## select RFID reader ##############################
|
|
#define RFID_READER_TYPE_MFRC522_SPI // use MFRC522 via SPI
|
|
//#define RFID_READER_TYPE_MFRC522_I2C // use MFRC522 via I2C
|
|
//#define RFID_READER_TYPE_PN5180 // use PN5180
|
|
//#define PN5180_ENABLE_LPCD // enable PN5180 low power card detection: wake up on card detection
|
|
|
|
|
|
//#################### Various settings ##############################
|
|
// Loglevels available (don't change!)
|
|
#define LOGLEVEL_ERROR 1 // only errors
|
|
#define LOGLEVEL_NOTICE 2 // errors + important messages
|
|
#define LOGLEVEL_INFO 3 // infos + errors + important messages
|
|
#define LOGLEVEL_DEBUG 4 // almost everything
|
|
|
|
// Serial-logging-configuration
|
|
const uint8_t serialDebug = LOGLEVEL_DEBUG; // Current loglevel for serial console
|
|
|
|
// Static ip-configuration
|
|
#ifdef STATIC_IP_ENABLE
|
|
IPAddress local_IP(192, 168, 2, 100); // Tonuino's IP
|
|
IPAddress gateway(192, 168, 2, 1); // IP of the gateway/router
|
|
IPAddress subnet(255, 255, 255, 0); // Netmask of your network (/24 => 255.255.255.0)
|
|
IPAddress primaryDNS(192, 168, 2, 1); // DNS-server of your network; in private networks it's usually the gatewy's IP
|
|
#endif
|
|
|
|
// Buttons (better leave unchanged if in doubts :-))
|
|
uint8_t buttonDebounceInterval = 50; // Interval in ms to software-debounce buttons
|
|
uint16_t intervalToLongPress = 700; // Interval in ms to distinguish between short and long press of previous/next-button
|
|
|
|
// RFID
|
|
#define RFID_SCAN_INTERVAL 300 // Interval-time in ms (how often is RFID read?)
|
|
|
|
// Automatic restart
|
|
#ifdef SHUTDOWN_IF_SD_BOOT_FAILS
|
|
uint32_t deepsleepTimeAfterBootFails = 20; // Automatic restart takes place if boot was not successful after this period (in seconds)
|
|
#endif
|
|
|
|
// FTP
|
|
// Nothing to be configured here...
|
|
// Default user/password is esp32/esp32 but can be changed via webgui
|
|
|
|
// Tonuino will create a WiFi if joing existing WiFi was not possible. Name can be configured here.
|
|
static const char accessPointNetworkSSID[] PROGMEM = "Tonuino"; // Access-point's SSID
|
|
|
|
// Where to store the backup-file for NVS-records
|
|
static const char backupFile[] PROGMEM = "/backup.txt"; // File is written every time a (new) RFID-assignment via GUI is done
|
|
|
|
// (webgui) File Browser
|
|
uint8_t FS_DEPTH = 5; // Max. recursion-depth of file tree
|
|
const char *DIRECTORY_INDEX_FILE = "/files.json"; // Filename of files.json index file
|
|
|
|
|
|
//#################### Settings for optional Modules##############################
|
|
// (optinal) Neopixel
|
|
#ifdef NEOPIXEL_ENABLE
|
|
#define NUM_LEDS 24 // number of LEDs
|
|
#define CHIPSET WS2812B // type of Neopixel
|
|
#define COLOR_ORDER GRB
|
|
#endif
|
|
|
|
// (optional) Default-voltages for battery-monitoring via Neopixel
|
|
float warningLowVoltage = 3.4; // If battery-voltage is >= this value, a cyclic warning will be indicated by Neopixel (can be changed via GUI!)
|
|
uint8_t voltageCheckInterval = 10; // How of battery-voltage is measured (in minutes) (can be changed via GUI!)
|
|
float voltageIndicatorLow = 3.0; // Lower range for Neopixel-voltage-indication (0 leds) (can be changed via GUI!)
|
|
float voltageIndicatorHigh = 4.2; // Upper range for Neopixel-voltage-indication (all leds) (can be changed via GUI!)
|
|
|
|
// (optinal) Headphone-detection (leave unchanged if in doubts...)
|
|
#ifdef HEADPHONE_ADJUST_ENABLE
|
|
uint16_t headphoneLastDetectionDebounce = 1000; // Debounce-interval in ms when plugging in headphone
|
|
#endif
|
|
|
|
// (optional) Topics for MQTT
|
|
#ifdef MQTT_ENABLE
|
|
uint16_t mqttRetryInterval = 60; // Try to reconnect to MQTT-server every (n) seconds if connection is broken
|
|
uint8_t mqttMaxRetriesPerInterval = 1; // Number of retries per time-interval (mqttRetryInterval). mqttRetryInterval 60 / mqttMaxRetriesPerInterval 1 => once every 60s
|
|
#define DEVICE_HOSTNAME "ESP32-Tonuino" // Name that is used for MQTT
|
|
static const char topicSleepCmnd[] PROGMEM = "Cmnd/Tonuino/Sleep";
|
|
static const char topicSleepState[] PROGMEM = "State/Tonuino/Sleep";
|
|
static const char topicRfidCmnd[] PROGMEM = "Cmnd/Tonuino/Rfid";
|
|
static const char topicRfidState[] PROGMEM = "State/Tonuino/Rfid";
|
|
static const char topicTrackState[] PROGMEM = "State/Tonuino/Track";
|
|
static const char topicTrackControlCmnd[] PROGMEM = "Cmnd/Tonuino/TrackControl";
|
|
static const char topicLoudnessCmnd[] PROGMEM = "Cmnd/Tonuino/Loudness";
|
|
static const char topicLoudnessState[] PROGMEM = "State/Tonuino/Loudness";
|
|
static const char topicSleepTimerCmnd[] PROGMEM = "Cmnd/Tonuino/SleepTimer";
|
|
static const char topicSleepTimerState[] PROGMEM = "State/Tonuino/SleepTimer";
|
|
static const char topicState[] PROGMEM = "State/Tonuino/State";
|
|
static const char topicCurrentIPv4IP[] PROGMEM = "State/Tonuino/IPv4";
|
|
static const char topicLockControlsCmnd[] PROGMEM ="Cmnd/Tonuino/LockControls";
|
|
static const char topicLockControlsState[] PROGMEM ="State/Tonuino/LockControls";
|
|
static const char topicPlaymodeState[] PROGMEM = "State/Tonuino/Playmode";
|
|
static const char topicRepeatModeCmnd[] PROGMEM = "Cmnd/Tonuino/RepeatMode";
|
|
static const char topicRepeatModeState[] PROGMEM = "State/Tonuino/RepeatMode";
|
|
static const char topicLedBrightnessCmnd[] PROGMEM = "Cmnd/Tonuino/LedBrightness";
|
|
static const char topicLedBrightnessState[] PROGMEM = "State/Tonuino/LedBrightness";
|
|
#ifdef MEASURE_BATTERY_VOLTAGE
|
|
static const char topicBatteryVoltage[] PROGMEM = "State/Tonuino/Voltage";
|
|
#endif
|
|
#endif
|