phschoen
/
ESPuino
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
175 Commits
1 Branch
0 Tags
30 MiB
 
 
 
 
 
 
Tree: 45c603f71c
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from '45c603f71c'
${ noResults }
ESPuino/PCBs/Headphone with PCM5102a and...
grch101 45c603f71c
Delete not required files. Update FastLed Lib back to 3.3.3. Led Error is shown when audio lib is returning an error 		5 years ago
..
KiCad Added gerberfile for headphone-PCB 5 years ago
Pictures Added gerberfile for headphone-PCB 5 years ago
gerber Added gerberfile for headphone-PCB 5 years ago
README.md Cleaned code a bit and added description (again) 5 years ago

README.md

Headphone-PCB

This is a pcb, that was kindly provided by a user of my Tonuino-fork. It makes use of a DAC named 'PCM5102A' with a TDA1308 as amp. PCM5102A supports I2S, so it can connected in parallel to MAX98357a to the I2S-pins BCLK, LRC and DIN. Of course, it needs 3.3V and GND, too. Please note that SMD-technique is used.
The 6th pin of connector J1 is used to indicate whether there's a plug or not. That means if there is a plug, this pin is pulled to GND and therefore can be used to connect to MAX98357.SD. Doing so will mute MAX's amp and vice versa. Of course you need a special headphone jack to use this feature. Additionaly this 6th pin can be connected to the ESP32 in order to make use of the feature HEADPHONE_ADJUST_ENABLE. Doing so can optionally limit the headphone's maximum volume (configureable via GUI).

Disclaimer

PCB-circuit is provided 'as is' without warranty. As previously stated it was kindly provided by a user and I only can give limited support to it. However: it runs fine without any problems in my Tonuinos.