You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
2.7 KiB
2.7 KiB
- 11.07.2020: Added support for reversed Neopixel addressing.
- 09.10.2020: mqttUser / mqttPassword can now be configured via webgui.
- 16.10.2020: Added English as supported lanuage.
- 01.11.2020: Added directive
SD_NOT_MANDATORY_ENABLE: for debugging puposes SD can be bypassed at boot. - 17.11.2020: Introduced a distinct volume for headphone for optional headphone-PCB.
- 20.11.2020: Added directive
MEASURE_BATTERY_VOLTAGE: monitoring battery's voltage is now supported. - 25.11.2020: WiFi can now be enabled/disabled instantly by pressing two buttons.
- 28.11.2020: Battery's voltage can now be visualized by Neopixel by short-press of rotary encoder's button.
- 28.11.2020: Added directive
PLAY_LAST_RFID_AFTER_REBOOT: ESPuino will recall the last RFID played after reboot. - 05.12.2020: Added filebrowser to webgui (thanks @mariolukas for contribution!)
- 05.12.2020: Moved all user-relevant settings to src/settings.h
- 06.12.2020: Added PCB for Wemos Lolin32
- 08.12.2020: Reworked MQTT-timeout-Management
- 09.12.2020: mDNS-feature added. If ESPuino's name is "ESPuino", you can use
ESPuino.localinstead it's of IP-address. - 11.12.2020: Revised GUI-design (thanks @mariolukas for contribution!) + (untested) PCB added for Wemos Lolin D32 + gerberfiles for headphone-PCB
- 18.12.2020: Added SD-MMC 1 Bit-mode (
SD_MMC_1BIT_MODE). This mode needs one GPIO less and provides almost doubled speed (compared to SPI) for FTP-transfers (thanks @tueddy for contribution!) - 18.12.2020: Added support for RFID-reader PN5180 (
RFID_READER_TYPE_PN5180). PN5180 has better RFID-range/sensitivity and can read ISO-15693 / iCode SLIX2-tags aka 'Tonies' (thanks @tueddy for contribution!) - 20.12.2020: Due to memory-issues with webstreams, FTP needs to be activated by pressing pause+next-button now
More to come... - 23.12.2020: User-config is now split into general part (settings.h) and develboard-specific part (e.g. settings-lolin32.h)
- 13.01.2020: Added fileexlorer to webgui (thanks @grch87 for contribution!). Now files and directories can be renamed, uploaded and deleted via webgui.
- 17.01.2020: Added directive
STATIC_IP_ENABLE: (optional) static IPv4-configuration - 18.01.2020: Added directive
PN5180_ENABLE_LPCD: awake from deepsleep with PN5180 is now possible (but needs another GPIO) - 25.01.2020: Added directive
USE_LAST_VOLUME_AFTER_REBOOT: Remembers volume used at last shutdown after reboot. This overwrites initial volume from GUI. - 28.01.2020: Removed cached RFID-filebrowser and replaced by realtime-browser
- 01.02.2020: Introducing PCB: Lolin32 with SD_MMC + PN5180
- 06.02.2020: German umlauts now supported. When uploading via FTP make sure to change charset to CP437.