phschoen
/
ESPuino
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
351 Commits
1 Branch
0 Tags
30 MiB
 
 
 
 
 
 
Tree: b2a19c1faf
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from 'b2a19c1faf'
${ noResults }
ESPuino/Hardware-Plaforms/ESP32-A1S-Audiokit
Torsten Stauder b2a19c1faf
Unifying command-names 		4 years ago
..
docs Add section for ESP32-A1S Audio Development Kit 5 years ago
README.md Refactoring 4 years ago

README.md

Things to know

  • As there's a lack of GPIOs, it's necessary to share a single SPI-instance by SD and RFID.
  • The board provides 6 keys but due to lack of free GPIOs, we need them for other purposes. Additionaly the problem is, that all keys are equipped with capacitors (maybe to debounce) which makes it hard to use those GPIOs for other purposes. That's why I unsoldered R66, 67, 68, 69, 70 (all 0 Ohms) to free these GPIOs from the capacitors.
  • Please note: key1 still works but if you additionaly want to use keys2-6, you can use GPIO36 along with analogRead() by using voltage-dividers. But first one has to calculate + solder resistor-pairs 56/61, 57/62, 58/63, 59/64 to 'build' those voltage-dividers. Without doing that online Key1 is usable as it doesn't need resistors. However, didn't solder/test dividers so far.
  • When switching over to use analogRead() one has to modify Button_Cyclic() in my code.
  • Additionaly I unsoldered resistor R14 in order to deactivate LED D4 (probably not necessary)

GPIOs (outdated! Best have a look at settings-espa1s.h)

Please note: You need to unsolder R66, 67, 68, 69, 70 first to use the board that way!

GPIO Usage Pin Comment
0 internal (I2S) MCLK
2 SD (int.) + RFID SPI.MISO Solder wire to SD.7 for RFID
4 Rot. Encoder BUTTON Solder wire to SD.8
5 Rot. Encoder CLK Via 14-pin-header
12 RFID SPI.CS Via JT_MTDI
13 internal (SD) SPI.CS CS for SD
14 SD (int.) + RFID SPI.SCK Via JT_MTMS
15 SD (int.) + RFID SPI.MOSI Via JT_MTDO
18 Rot. Encoder DT Via 14-pin-header
19 Power For switch on/off external hardware via MOSFET (optional)
21 internal (amp) To switch on/off amp
22 unused? Via 14-pin-header
23 Neopixel DI Via 14-pin-header
25 internal (I2S) DSIN
26 internal (I2S) LRC
27 internal (I2S) BCLK
32 internal (I2C) CLK
33 internal (I2C) DATA
34 internal (SD) DETECT To detect if SD is present (not used)
35 internal (I2S) DOUT
36 internal (Key) A/D Analog read for keys 1-6 or digial read for only key 1
39 internal (HP) DETECT Detects if headphone is plugged in

Now, question is what to do with GPIO22. Could be used to externally connect keys for analogRead() via voltage-dividers.

Power-consumption

  • IDLE: 105 mA
  • Deepsleep (without RFID + Neopixel): 30 mA

Things to consider

  • I didn't battery-power this board (guess it works but didn't test). But as current in deepsleep still is 30 mA, this probably doesn't make sense.
  • When using a switch (instead of putting 'only' to deepsleep), GPIO 19 (power) could be omitted. Along with GPIO 22, these buttons could be used as buttons 'previous' and 'next'. Third button could be omitted by assigning short-press-action of rotary-encoder for 'pause/play'.
  • In order to safe energy consider the unsolder LEDs.

Please note