You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
205 lines
11 KiB
205 lines
11 KiB
#include "Arduino.h"
|
|
#include "values.h"
|
|
|
|
//######################### INFOS ####################################
|
|
// This is the general configfile for ESPuino-configuration.
|
|
|
|
//################## HARDWARE-PLATFORM ###############################
|
|
/* Make sure to also edit the configfile, that is specific for your platform.
|
|
If in doubts (your develboard is not listed) use HAL 1
|
|
1: Wemos Lolin32 => settings-lolin32.h
|
|
2: ESP32-A1S Audiokit => settings-espa1s.h
|
|
3: Wemos Lolin D32 => settings-lolin_D32.h
|
|
4: Wemos Lolin D32 pro => settings-lolin_D32_pro.h
|
|
99: custom => settings-custom.h
|
|
more to come...
|
|
*/
|
|
#define HAL 1 // HAL 1 = LoLin32, 2 = ESP32-A1S-AudioKit, 3 = Lolin D32, 4 = Lolin D32 pro; 99 = custom
|
|
|
|
|
|
//########################## MODULES #################################
|
|
#define MDNS_ENABLE // When enabled, you don't have to handle with ESPuino's IP-address. If hostname is set to "ESPuino", you can reach it via ESPuino.local
|
|
#define MQTT_ENABLE // Make sure to configure mqtt-server and (optionally) username+pwd
|
|
#define FTP_ENABLE // Enables FTP-server; DON'T FORGET TO ACTIVATE AFTER BOOT BY PRESSING PAUSE + NEXT-BUTTONS (IN PARALLEL)!
|
|
#define NEOPIXEL_ENABLE // Don't forget configuration of NUM_LEDS if enabled
|
|
//#define NEOPIXEL_REVERSE_ROTATION // Some Neopixels are adressed/soldered counter-clockwise. This can be configured here.
|
|
#define LANGUAGE 1 // 1 = deutsch; 2 = english
|
|
//#define STATIC_IP_ENABLE // Enables static IP-configuration (change static ip-section accordingly)
|
|
//#define HEADPHONE_ADJUST_ENABLE // Used to adjust (lower) volume for optional headphone-pcb (refer maxVolumeSpeaker / maxVolumeHeadphone)
|
|
#define SHUTDOWN_IF_SD_BOOT_FAILS // Will put ESP to deepsleep if boot fails due to SD. Really recommend this if there's in battery-mode no other way to restart ESP! Interval adjustable via deepsleepTimeAfterBootFails.
|
|
#define MEASURE_BATTERY_VOLTAGE // Enables battery-measurement via GPIO (ADC) and voltage-divider
|
|
//#define PLAY_LAST_RFID_AFTER_REBOOT // When restarting ESPuino, the last RFID that was active before, is recalled and played
|
|
//#define USE_LAST_VOLUME_AFTER_REBOOT // Remembers the volume used at last shutdown after reboot
|
|
#define USEROTARY_ENABLE // If rotary-encoder is used
|
|
|
|
#define BLUETOOTH_ENABLE // If enabled and bluetooth-mode is active, you can stream to your ESPuino via bluetooth (a2dp-sink).
|
|
|
|
|
|
//################## select SD card mode #############################
|
|
//#define SD_MMC_1BIT_MODE // run SD card in SD-MMC 1Bit mode
|
|
//#define SINGLE_SPI_ENABLE // If only one SPI-instance should be used instead of two (not yet working!) (Works on ESP32-A1S with RFID via I2C)
|
|
|
|
|
|
//################## select RFID reader ##############################
|
|
#define RFID_READER_TYPE_MFRC522_SPI // use MFRC522 via SPI
|
|
//#define RFID_READER_TYPE_MFRC522_I2C // use MFRC522 via I2C
|
|
//#define RFID_READER_TYPE_PN5180 // use PN5180
|
|
|
|
#ifdef RFID_READER_TYPE_PN5180
|
|
//#define PN5180_ENABLE_LPCD // enable PN5180 low power card detection. Wakes up ESPuino if RFID-tag was applied while deepsleep is active.
|
|
#endif
|
|
|
|
#ifdef RFID_READER_TYPE_MFRC522_SPI
|
|
uint8_t rfidGain = 0x07 << 4; // Sensitivity of RC522. For possible values see reference: https://forum.espuino.de/uploads/default/original/1X/9de5f8d35cbc123c1378cad1beceb3f51035cec0.png
|
|
#endif
|
|
|
|
|
|
//#################### Various settings ##############################
|
|
// Loglevels available (don't change!)
|
|
#define LOGLEVEL_ERROR 1 // only errors
|
|
#define LOGLEVEL_NOTICE 2 // errors + important messages
|
|
#define LOGLEVEL_INFO 3 // infos + errors + important messages
|
|
#define LOGLEVEL_DEBUG 4 // almost everything
|
|
|
|
// Serial-logging-configuration
|
|
const uint8_t serialDebug = LOGLEVEL_DEBUG; // Current loglevel for serial console
|
|
|
|
// Static ip-configuration
|
|
#ifdef STATIC_IP_ENABLE
|
|
IPAddress local_IP(192, 168, 2, 100); // ESPuino's IP
|
|
IPAddress gateway(192, 168, 2, 1); // IP of the gateway/router
|
|
IPAddress subnet(255, 255, 255, 0); // Netmask of your network (/24 => 255.255.255.0)
|
|
IPAddress primaryDNS(192, 168, 2, 1); // DNS-server of your network; in private networks it's usually the gatewy's IP
|
|
#endif
|
|
|
|
// Buttons (better leave unchanged if in doubts :-))
|
|
uint8_t buttonDebounceInterval = 50; // Interval in ms to software-debounce buttons
|
|
uint16_t intervalToLongPress = 700; // Interval in ms to distinguish between short and long press of previous/next-button
|
|
|
|
// RFID
|
|
#define RFID_SCAN_INTERVAL 300 // Interval-time in ms (how often is RFID read?)
|
|
|
|
// Automatic restart
|
|
#ifdef SHUTDOWN_IF_SD_BOOT_FAILS
|
|
uint32_t deepsleepTimeAfterBootFails = 20; // Automatic restart takes place if boot was not successful after this period (in seconds)
|
|
#endif
|
|
|
|
// FTP
|
|
// Nothing to be configured here...
|
|
// Default user/password is esp32/esp32 but can be changed via webgui
|
|
|
|
// ESPuino will create a WiFi if joing existing WiFi was not possible. Name can be configured here.
|
|
static const char accessPointNetworkSSID[] PROGMEM = "ESPuino"; // Access-point's SSID
|
|
static const char nameBluetoothDevice[] PROGMEM = "ESPuino"; // Name of your ESPuino as Bluetooth-device
|
|
|
|
// Where to store the backup-file for NVS-records
|
|
static const char backupFile[] PROGMEM = "/backup.txt"; // File is written every time a (new) RFID-assignment via GUI is done
|
|
|
|
|
|
//#################### Settings for optional Modules##############################
|
|
// (optinal) Neopixel
|
|
#ifdef NEOPIXEL_ENABLE
|
|
#define NUM_LEDS 24 // number of LEDs
|
|
#define CHIPSET WS2812B // type of Neopixel
|
|
#define COLOR_ORDER GRB
|
|
#endif
|
|
|
|
// (optional) Default-voltages for battery-monitoring via Neopixel
|
|
float warningLowVoltage = 3.4; // If battery-voltage is >= this value, a cyclic warning will be indicated by Neopixel (can be changed via GUI!)
|
|
uint8_t voltageCheckInterval = 10; // How of battery-voltage is measured (in minutes) (can be changed via GUI!)
|
|
float voltageIndicatorLow = 3.0; // Lower range for Neopixel-voltage-indication (0 leds) (can be changed via GUI!)
|
|
float voltageIndicatorHigh = 4.2; // Upper range for Neopixel-voltage-indication (all leds) (can be changed via GUI!)
|
|
|
|
// (optinal) Headphone-detection (leave unchanged if in doubts...)
|
|
#ifdef HEADPHONE_ADJUST_ENABLE
|
|
uint16_t headphoneLastDetectionDebounce = 1000; // Debounce-interval in ms when plugging in headphone
|
|
#endif
|
|
|
|
// (optional) Topics for MQTT
|
|
#ifdef MQTT_ENABLE
|
|
uint16_t mqttRetryInterval = 60; // Try to reconnect to MQTT-server every (n) seconds if connection is broken
|
|
uint8_t mqttMaxRetriesPerInterval = 1; // Number of retries per time-interval (mqttRetryInterval). mqttRetryInterval 60 / mqttMaxRetriesPerInterval 1 => once every 60s
|
|
#define DEVICE_HOSTNAME "ESP32-ESPuino" // Name that is used for MQTT
|
|
static const char topicSleepCmnd[] PROGMEM = "Cmnd/ESPuino/Sleep";
|
|
static const char topicSleepState[] PROGMEM = "State/ESPuino/Sleep";
|
|
static const char topicRfidCmnd[] PROGMEM = "Cmnd/ESPuino/Rfid";
|
|
static const char topicRfidState[] PROGMEM = "State/ESPuino/Rfid";
|
|
static const char topicTrackState[] PROGMEM = "State/ESPuino/Track";
|
|
static const char topicTrackControlCmnd[] PROGMEM = "Cmnd/ESPuino/TrackControl";
|
|
static const char topicLoudnessCmnd[] PROGMEM = "Cmnd/ESPuino/Loudness";
|
|
static const char topicLoudnessState[] PROGMEM = "State/ESPuino/Loudness";
|
|
static const char topicSleepTimerCmnd[] PROGMEM = "Cmnd/ESPuino/SleepTimer";
|
|
static const char topicSleepTimerState[] PROGMEM = "State/ESPuino/SleepTimer";
|
|
static const char topicState[] PROGMEM = "State/ESPuino/State";
|
|
static const char topicCurrentIPv4IP[] PROGMEM = "State/ESPuino/IPv4";
|
|
static const char topicLockControlsCmnd[] PROGMEM ="Cmnd/ESPuino/LockControls";
|
|
static const char topicLockControlsState[] PROGMEM ="State/ESPuino/LockControls";
|
|
static const char topicPlaymodeState[] PROGMEM = "State/ESPuino/Playmode";
|
|
static const char topicRepeatModeCmnd[] PROGMEM = "Cmnd/ESPuino/RepeatMode";
|
|
static const char topicRepeatModeState[] PROGMEM = "State/ESPuino/RepeatMode";
|
|
static const char topicLedBrightnessCmnd[] PROGMEM = "Cmnd/ESPuino/LedBrightness";
|
|
static const char topicLedBrightnessState[] PROGMEM = "State/ESPuino/LedBrightness";
|
|
#ifdef MEASURE_BATTERY_VOLTAGE
|
|
static const char topicBatteryVoltage[] PROGMEM = "State/ESPuino/Voltage";
|
|
#endif
|
|
#endif
|
|
|
|
#if defined RFID_READER_TYPE_MFRC522_SPI || defined RFID_READER_TYPE_MFRC522_I2C
|
|
#define RFID_CARDMAN
|
|
#endif
|
|
|
|
#define CHUNK_SIZE 1024
|
|
|
|
|
|
// Button-layout
|
|
/* Please note the following numbers as you need to know them in order to define actions for buttons.
|
|
Even if you don't use all of them, their numbers won't change
|
|
0: NEXT_BUTTON
|
|
1: PREVIOUS_BUTTON
|
|
2: PAUSEPLAY_BUTTON
|
|
3: DREHENCODER_BUTTON
|
|
4: BUTTON_4
|
|
5: BUTTON_5
|
|
|
|
Don't forget to enable those buttons you want to use in your develboard-specific config (e.g. settings-custom.h)
|
|
|
|
Multi-buttons (examples):
|
|
BUTTON_MULTI_01 => Buttons 0+1 (NEXT+PREVIOUS) pressed in parallel
|
|
BUTTON_MULTI_23 => Buttons 0+2 (NEXT+PAUSEPLAY_BUTTON) pressed in parallel
|
|
|
|
Single-buttons (examples):
|
|
BUTTON_0_SHORT => Button 0 (NEXT) pressed shortly
|
|
BUTTON_3_SHORT => Button 3 (DREHENCODER) pressed shortly
|
|
|
|
Actions:
|
|
To all of those buttons, an action can be assigned freely.
|
|
Please have a look at values.h to look up actions available (>100 can be used)
|
|
*/
|
|
// *****BUTTON***** *****ACTION*****
|
|
#define BUTTON_MULTI_01 TOGGLE_WIFI_STATUS
|
|
#define BUTTON_MULTI_02 ENABLE_FTP_SERVER
|
|
#define BUTTON_MULTI_03 CMD_NOTHING
|
|
#define BUTTON_MULTI_12 CMD_NOTHING
|
|
#define BUTTON_MULTI_13 CMD_NOTHING
|
|
#define BUTTON_MULTI_23 CMD_NOTHING
|
|
|
|
#define BUTTON_0_SHORT CMD_NEXTTRACK
|
|
#define BUTTON_1_SHORT CMD_PREVTRACK
|
|
#define BUTTON_2_SHORT CMD_PLAYPAUSE
|
|
#define BUTTON_3_SHORT CMD_MEASUREBATTERY
|
|
#define BUTTON_3_LONG CMD_SLEEPMODE
|
|
|
|
#define BUTTON_4_SHORT CMD_VOLUMEDOWN
|
|
#define BUTTON_4_LONG CMD_VOLUMEDOWN
|
|
#define BUTTON_5_SHORT CMD_VOLUMEUP
|
|
#define BUTTON_5_LONG CMD_VOLUMEUP
|
|
|
|
#ifdef USEROTARY_ENABLE
|
|
#define BUTTON_0_LONG CMD_LASTTRACK
|
|
#define BUTTON_1_LONG CMD_FIRSTTRACK
|
|
#define BUTTON_2_LONG CMD_PLAYPAUSE
|
|
#else
|
|
#define BUTTON_0_LONG CMD_VOLUMEDOWN
|
|
#define BUTTON_1_LONG CMD_VOLUMEUP
|
|
#define BUTTON_2_LONG CMD_SLEEPMODE
|
|
#endif
|