/* This project is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. Multiprotocol is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with Multiprotocol. If not, see . */ #include "config.h" uint8_t curr_bank = 0; const PPM_Parameters PPM_prot[14]= { //****************************** BANK 1 ****************************** // Switch Protocol Sub protocol RX_Num Power Auto Bind Option /* 1 */ {PROTO_FRSKYD, 0 , 0 , P_LOW , AUTOBIND , 0 }, /* 2 */ {PROTO_FRSKYD, 0 , 0 , P_LOW , AUTOBIND , 20 }, /* 3 */ {PROTO_FRSKYD, 0 , 0 , P_LOW , AUTOBIND , 40 }, /* 4 */ {PROTO_FRSKYD, 0 , 0 , P_LOW , AUTOBIND , 60 }, /* 5 */ {PROTO_FRSKYD, 0 , 0 , P_LOW , AUTOBIND , 80 }, /* 6 */ {PROTO_FRSKYD, 0 , 0 , P_LOW , AUTOBIND , 100 }, /* 7 */ {PROTO_FRSKYD, 0 , 0 , P_LOW , AUTOBIND , 120 }, /* 8 */ {PROTO_FRSKYD, 0 , 0 , P_LOW , AUTOBIND , 140 }, /* 9 */ {PROTO_FRSKYD, 0 , 0 , P_LOW , AUTOBIND , 160 }, /* 10 */ {PROTO_FRSKYD, 0 , 0 , P_LOW , AUTOBIND , 180 }, /* 11 */ {PROTO_FRSKYD, 0 , 0 , P_LOW , AUTOBIND , 200 }, /* 12 */ {PROTO_FRSKYD, 0 , 0 , P_LOW , AUTOBIND , 220 }, // option=fine freq tuning /* 13 */ {PROTO_FRSKYD, 0 , 0 , P_LOW , AUTOBIND , 240 }, /* 14 */ {PROTO_FRSKYD, 0 , 0 , P_LOW , AUTOBIND , 255 }, }; /* Available protocols and associated sub protocols to pick and choose from PROTO_FLYSKY Flysky V9X9 V6X6 V912 CX20 PROTO_HUBSAN H107 H301 H501 PROTO_FRSKYV NONE PROTO_FRSKYD NONE PROTO_FRSKYX CH_16 CH_8 EU_16 EU_8 PROTO_HISKY Hisky HK310 PROTO_V2X2 V2X2 JXD506 PROTO_DSM DSM2_22 DSM2_11 DSMX_22 DSMX_11 PROTO_DEVO NONE PROTO_YD717 YD717 SKYWLKRP_LOW SYMAX4 XINXUN NIHUI PROTO_KN WLTOYS FEILUN PROTO_SYMAX SYMAX SYMAX5C PROTO_SLT NONE PROTO_CX10 CX10_GREEN CX10_BLUE DM007 JC3015_1 JC3015_2 MK33041 PROTO_Q2X2 Q222 Q242 Q282 PROTO_SLT SLT VISTA PROTO_CG023 CG023 YD829 PROTO_BAYANG BAYANG H8S3D X16_AH IRDRONE PROTO_ESKY NONE PROTO_MT99XX MT99 H7 YZ LS FY805 PROTO_MJXQ WLH08 X600 X800 H26D E010 H26WH PROTO_SHENQI NONE PROTO_FY326 FY326 FY319 PROTO_SFHSS NONE PROTO_J6PRO NONE PROTO_FQ777 NONE PROTO_ASSAN NONE PROTO_HONTAI HONTAI JJRCX1 X5C1 FQ777_951 PROTO_AFHDS2A PWM_IBUS PPM_IBUS PWM_SBUS PPM_SBUS PROTO_WK2x01 WK2801 WK2401 W6_5_1 W6_6_1 W6_HEL W6_HEL_I PROTO_Q303 Q303 CX35 CX10D CX10WD PROTO_GW008 NONE PROTO_DM002 NONE PROTO_CABELL CABELL_V3 CABELL_V3_TELEMETRY CABELL_SET_FAIL_SAFE CABELL_UNBIND PROTO_ESKY150 PROTO_H8_3D H8_3D H20H H20MINI H30MINI PROTO_CORONA COR_V1 COR_V2 FD_V3 PROTO_CFLIE NONE PROTO_HITEC OPT_FW OPT_HUB MINIMA PROTO_WFLY NONE PROTO_BUGS NONE PROTO_SLT SLT_V1 SLT_V2 Q100 Q200 MR100 */ // RX_Num is used for TX & RX match. Using different RX_Num values for each receiver will prevent starting a model with the false config loaded... // RX_Num value is between 0 and 15. // Power P_HIGH or P_LOW: High or low power setting for the transmission. // For indoor P_LOW is more than enough. // Auto Bind AUTOBIND or NO_AUTOBIND // For protocols which does not require binding at each power up (like Flysky, FrSky...), you might still want a bind to be initiated each time you power up the TX. // As an example, it's usefull for the WLTOYS F929/F939/F949/F959 (all using the Flysky protocol) which requires a bind at each power up. // It also enables the Bind from channel feature, allowing to execute a bind by toggling a designated channel. // Option: the value is between -128 and +127. // The option value is only valid for some protocols, read this page for more information: https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/blob/master/Protocols_Details.md