phschoen
/
ESPuino
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

User-wish: added optional directive USE_LAST_VOLUME_AFTER_REBOOT

master
Torsten Stauder 4 years ago
parent
2845a760b4
commit
04bc34472e
5 changed files with 42 additions and 24 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 3
      README.md
  2. 3
      src/logmessages.h
  3. 3
      src/logmessages_EN.h
  4. 34
      src/main.cpp
  5. 23
      src/settings.h

3
README.md
View File

@ -28,6 +28,7 @@ Finally, the long announced Tonuino-PCB for Wemos' Lolin32 is [there](https://gi
* 13.01.2020: Added fileexlorer to webgui (thanks @grch87 for contribution!). Now files and directories can be renamed, uploaded and deleted via webgui.
* 17.01.2020: Added directive `STATIC_IP_ENABLE`: (optional) static IPv4-configuration
* 18.01.2020: Added directive `PN5180_ENABLE_LPCD`: awake from deepsleep with PN5180 is now possible (but needs another GPIO)
* 25.01.2020: Added directive `USE_LAST_VOLUME_AFTER_REBOOT`: Remembers volume used at last shutdown after reboot. This overwrites initial volume from GUI.
## Known bugs
* Some webstreams don't run. Guess it's a combination of saturated connection-pool and lack of heap-memory. Works probably better if ESP32-WROVER (e.g. Lolin D32 pro) is used, as this chip has PSRAM. Advice: Don't enable modules (e.g. MQTT) if you don't need them as this could save memory (and trouble).
* English translation for webgui is currently outdated. This will be fixed soon when i18n-support will be integrated.
@ -87,7 +88,7 @@ The heart of my project is an ESP32 on a [Wemos Lolin32 development-board](https
* If Neopixel enabled: set NUM_LEDS to the LED-number of your Neopixel-ring and define the Neopixel-type using `#define CHIPSET`
* If you're using Arduino-IDE please make sure to change ESP32's partition-layout to `No OTA (2MB APP/2MB Spiffs)` as otherwise the sketch won't fit into the flash-memory.
* Open board-specific config-file and edit according your needs.
* If you want to monitor battery's voltage, make sure to enable `MEASURE_BATTERY_VOLTAGE`. Use a voltage-divider as voltage of a LiPo is way too high for ESP32 (only 3.3V supported!). For my tests I connected VBat with a serial connection of 130k + 390k resistors (VBat(+)--130k--X--390k--VBat(-)). X is the measure-point where to connect the GPIO to. If using Lolin D32 or Lolin D32 pro, make sure to leave both resistor-values unchanged at 100k. Same for GPIO: unchanged at 35.
* If you want to monitor battery's voltage, make sure to enable `MEASURE_BATTERY_VOLTAGE`. Use a voltage-divider as voltage of a LiPo is way too high for ESP32 (only 3.3V supported!). For my tests I connected VBat with a serial connection of 130k + 130k resistors (VBat(+)--130k--X--130k--VBat(-)). X is the measure-point where to connect the GPIO to. If using Lolin D32 or Lolin D32 pro, make sure to leave both resistor-values unchanged at 100k. Same for GPIO: unchanged at 35.
Please note: via GUI upper and lower voltage cut-offs for visualisation of battery-voltage (Neopixel) is available. Additional GUI-configurable values are interval (in minutes) for checking battery voltage and the cut off-voltage below whose a warning is shown via Neopixel.
* If you're using a headphone-pcb with a [headphone jack](https://www.conrad.de/de/p/cliff-fcr1295-klinken-steckverbinder-3-5-mm-buchse-einbau-horizontal-polzahl-3-stereo-schwarz-1-st-705830.html) that has a pin to indicate if there's a plug, you can use this signal along with the feature `HEADPHONE_ADJUST_ENABLE` to limit the maximum headphone-voltage automatically. As per default you have to invert this signal (with a P-channel MOSFET) and connect it to GPIO22.
* Enabling `SHUTDOWN_IF_SD_BOOT_FAILS` is really recommended if you run your Tonuino in battery-mode without having a restart-button exposed to the outside of Tonuino's enclosure. Because otherwise there's no way to restart your Tonuino and the error-state will remain until battery is empty (or you open the enclosure, hehe).

3
src/logmessages.h
View File

@ -172,4 +172,5 @@ static const char freeHeapAfterSetup[] PROGMEM = "Freier Heap-Speicher nach Setu
static const char tryStaticIpConfig[] PROGMEM = "Statische IP-Konfiguration wird durchgeführt...";
static const char staticIPConfigFailed[] PROGMEM = "Statische IP-Konfiguration fehlgeschlagen";
static const char wakeUpRfidNoIso14443[] PROGMEM = "ESP32 wurde vom Kartenleser aus dem Deepsleep aufgeweckt. Allerdings wurde keine ISO-14443-Karte gefunden. Gehe zurück in den Deepsleep...";
static const char lowPowerCardSuccess[] PROGMEM = "Kartenerkennung via 'low power' erfolgreich durchgeführt";
static const char lowPowerCardSuccess[] PROGMEM = "Kartenerkennung via 'low power' erfolgreich durchgeführt";
static const char rememberLastVolume[] PROGMEM = "Lautstärke vor dem letzten Shutdown wird wiederhergestellt. Dies überschreibt die Einstellung der initialen Lautstärke aus der GUI.";

3
src/logmessages_EN.h
View File

@ -172,4 +172,5 @@ static const char freeHeapAfterSetup[] PROGMEM = "Free heap after setup";
static const char tryStaticIpConfig[] PROGMEM = "Performing static IP-configuration...";
static const char staticIPConfigFailed[] PROGMEM = "Static IP-configuration failed";
static const char wakeUpRfidNoIso14443[] PROGMEM = "Wakeup caused by low power card-detection. RF-field changed but no ISO-14443 card on reader was found. So I'll return back to sleep now...";
static const char lowPowerCardSuccess[] PROGMEM = "Switch to low power card-detection: success";
static const char lowPowerCardSuccess[] PROGMEM = "Switch to low power card-detection: success";
static const char rememberLastVolume[] PROGMEM = "Restored volume used before last shutdown. This overwrites the initial volume configured via webgui.";

34
src/main.cpp
View File

@ -2433,6 +2433,9 @@ void deepSleepManager(void) {
FastLED.clear();
FastLED.show();
#endif
#ifdef USE_LAST_VOLUME_AFTER_REBOOT
prefsSettings.putUInt("previousVolume", currentVolume);
#endif
// SD card goto idle mode
#ifdef SD_MMC_1BIT_MODE
SD_MMC.end();
@ -4408,16 +4411,27 @@ void setup() {
loggerNl(serialDebug, (char *) FPSTR(wroteMaxInactivityToNvs), LOGLEVEL_ERROR);
}
// Get initial volume from NVS
uint32_t nvsInitialVolume = prefsSettings.getUInt("initVolume", 0);
if (nvsInitialVolume) {
initVolume = nvsInitialVolume;
snprintf(logBuf, serialLoglength, "%s: %u", (char *) FPSTR(restoredInitialLoudnessFromNvs), nvsInitialVolume);
loggerNl(serialDebug, logBuf, LOGLEVEL_INFO);
} else {
prefsSettings.putUInt("initVolume", initVolume);
loggerNl(serialDebug, (char *) FPSTR(wroteInitialLoudnessToNvs), LOGLEVEL_ERROR);
}
#ifndef USE_LAST_VOLUME_AFTER_REBOOT
// Get initial volume from NVS
uint32_t nvsInitialVolume = prefsSettings.getUInt("initVolume", 0);
#else
// Get volume used at last shutdown
uint32_t nvsInitialVolume = prefsSettings.getUInt("previousVolume", 999);
if (nvsInitialVolume == 999) {
prefsSettings.putUInt("previousVolume", initVolume);
nvsInitialVolume = initVolume;
} else {
loggerNl(serialDebug, (char *) FPSTR(rememberLastVolume), LOGLEVEL_ERROR);
}
#endif
if (nvsInitialVolume) {
initVolume = nvsInitialVolume;
snprintf(logBuf, serialLoglength, "%s: %u", (char *) FPSTR(restoredInitialLoudnessFromNvs), nvsInitialVolume);
loggerNl(serialDebug, logBuf, LOGLEVEL_INFO);
} else {
prefsSettings.putUInt("initVolume", initVolume);
loggerNl(serialDebug, (char *) FPSTR(wroteInitialLoudnessToNvs), LOGLEVEL_ERROR);
}
// Get maximum volume for speaker from NVS
uint32_t nvsMaxVolumeSpeaker = prefsSettings.getUInt("maxVolumeSp", 0);

23
src/settings.h
View File

@ -16,17 +16,18 @@
//########################## MODULES #################################
#define MDNS_ENABLE // When enabled, you don't have to handle with Tonuino's IP-address. If hostname is set to "tonuino", you can reach it via tonuino.local
#define MQTT_ENABLE // Make sure to configure mqtt-server and (optionally) username+pwd
#define FTP_ENABLE // Enables FTP-server; DON'T FORGET TO ACTIVATE AFTER BOOT BY PRESSING PAUSE + NEXT-BUTTONS (IN PARALLEL)!
#define NEOPIXEL_ENABLE // Don't forget configuration of NUM_LEDS if enabled
#define NEOPIXEL_REVERSE_ROTATION // Some Neopixels are adressed/soldered counter-clockwise. This can be configured here.
#define LANGUAGE 1 // 1 = deutsch; 2 = english
//#define STATIC_IP_ENABLE // Enables static IP-configuration (change static ip-section accordingly)
//#define HEADPHONE_ADJUST_ENABLE // Used to adjust (lower) volume for optional headphone-pcb (refer maxVolumeSpeaker / maxVolumeHeadphone)
#define SHUTDOWN_IF_SD_BOOT_FAILS // Will put ESP to deepsleep if boot fails due to SD. Really recommend this if there's in battery-mode no other way to restart ESP! Interval adjustable via deepsleepTimeAfterBootFails.
#define MEASURE_BATTERY_VOLTAGE // Enables battery-measurement via GPIO (ADC) and voltage-divider
//#define PLAY_LAST_RFID_AFTER_REBOOT // When restarting Tonuino, the last RFID that was active before, is recalled and played
#define MDNS_ENABLE // When enabled, you don't have to handle with Tonuino's IP-address. If hostname is set to "tonuino", you can reach it via tonuino.local
#define MQTT_ENABLE // Make sure to configure mqtt-server and (optionally) username+pwd
#define FTP_ENABLE // Enables FTP-server; DON'T FORGET TO ACTIVATE AFTER BOOT BY PRESSING PAUSE + NEXT-BUTTONS (IN PARALLEL)!
#define NEOPIXEL_ENABLE // Don't forget configuration of NUM_LEDS if enabled
//#define NEOPIXEL_REVERSE_ROTATION // Some Neopixels are adressed/soldered counter-clockwise. This can be configured here.
#define LANGUAGE 1 // 1 = deutsch; 2 = english
//#define STATIC_IP_ENABLE // Enables static IP-configuration (change static ip-section accordingly)
//#define HEADPHONE_ADJUST_ENABLE // Used to adjust (lower) volume for optional headphone-pcb (refer maxVolumeSpeaker / maxVolumeHeadphone)
#define SHUTDOWN_IF_SD_BOOT_FAILS // Will put ESP to deepsleep if boot fails due to SD. Really recommend this if there's in battery-mode no other way to restart ESP! Interval adjustable via deepsleepTimeAfterBootFails.
#define MEASURE_BATTERY_VOLTAGE // Enables battery-measurement via GPIO (ADC) and voltage-divider
//#define PLAY_LAST_RFID_AFTER_REBOOT // When restarting Tonuino, the last RFID that was active before, is recalled and played
//#define USE_LAST_VOLUME_AFTER_REBOOT // Remembers the volume used at last shutdown after reboot
//#define BLUETOOTH_ENABLE // Doesn't work currently (so don't enable) as there's not enough DRAM available

Write Preview
Loading…
Cancel
Save