This is a fork of the popular [Tonuino-project](https://github.com/xfjx/TonUINO) which means, that it only shares the basic concept of controlling music-play by RFID-tags and buttons. **Said this I want to make clear, that the code-basis is completely different**. So there might be features, that are supported by my fork whereas others are missing or implemented different. For sure both share that it's non-profit, DIY and developed on [Arduino](https://www.arduino.cc/.
This is a **fork** of the popular [Tonuino-project](https://github.com/xfjx/TonUINO) which means, that it only shares the basic concept of controlling music-play by RFID-tags and buttons. **Said this I want to make clear, that the code-basis is completely different**. So there might be features, that are supported by my fork whereas others are missing or implemented different. For sure both share that it's non-profit, DIY and developed on [Arduino](https://www.arduino.cc/.
**Please note: This project is still under development. So it's not yet feature-complete (e.g. webinterface is missing).**
**Please note: This project is still under development. So it's not yet feature-complete (e.g. webinterface is missing).**
@ -22,14 +22,16 @@ So it's about time to have a look at the hardware I used. It's a ESP32 on a deve
* uSD-card doesn't have to be super-fast; uC is limiting the throughput. Tested 32GB without any problems.
Most of them can be ordered cheaper directly in China. It's just a give an short impression of the hardware; feel free to order where ever you want to. I don't earn money with my links :-)
Most of them can be ordered cheaper directly in China. It's just a give an short impression of the hardware; feel free to order where ever you want to. I don't earn money with my links :-)
## Getting Started
## Getting Started
I recommend Microsoft's [Visual Studio Code](https://code.visualstudio.com/) alongside with [Platformio Plugin](https://platformio.org/install/ide?install=vscode.) Since my project on Github contains [platformio.ini](platformio.ini), libraries used should be fetched automatically. Please note: If you use another ESP32-develboard (Lolin32) you might have to change "env:" in platformio.ini to the corresponding value. Documentation can be found [here](https://docs.platformio.org/en/latest/projectconf.html). After that it might be necessary to adjust the names of the GPIO-pins in the upper #define-section of my code.
I recommend Microsoft's [Visual Studio Code](https://code.visualstudio.com/) alongside with [Platformio Plugin](https://platformio.org/install/ide?install=vscode.) Since my project on Github contains [platformio.ini](platformio.ini), libraries used should be fetched automatically. Please note: if you use another ESP32-develboard (Lolin32 e.g.) you might have to change "env:" in platformio.ini to the corresponding value. Documentation can be found [here](https://docs.platformio.org/en/latest/projectconf.html). After that it might be necessary to adjust the names of the GPIO-pins in the upper #define-section of my code.
## Wiring
## Wiring
A lot of wiring is needed to get it running. After my first experients I soldered the stuff to avoid wild-west-cabling. Feel free to design your own PCBs.
A lot of wiring is needed to get it working. After my first experients I soldered the stuff to avoid wild-west-cabling. Feel free to design your own PCBs.
| 5 V | SD-reader | VCC | Connect to p-channel MOSFET for power-saving when uC is off |
| 5 V | SD-reader | VCC | Connect to p-channel MOSFET for power-saving when uC is off |
@ -66,17 +68,19 @@ A lot of wiring is needed to get it running. After my first experients I soldere
| 12 | Neopixel | DI | |
| 12 | Neopixel | DI | |
| 17 | BC337 (via R5) | Base | Don't forget R5! |
| 17 | BC337 (via R5) | Base | Don't forget R5! |
Optionally, GPIO 17 can be used to drive an NPN-transistor (BC337-40) that pulls a p-channel MOSFET (IRF9520) to GND in order to switch off current. Transistor-circuit is described [here](https://dl6gl.de/schalten-mit-transistoren): Just have a look at Abb. 4. Values of the resistors I used: R1: 10k, R2: omitted(!), R4: 10k, R5: 4,7k
Optionally, GPIO 17 can be used to drive an NPN-transistor (BC337-40) that pulls a p-channel MOSFET (IRF9520) to GND in order to switch off 5V-current. Transistor-circuit is described [here](https://dl6gl.de/schalten-mit-transistoren): Just have a look at Abb. 4. Values of the resistors I used: R1: 10k, R2: omitted(!), R4: 10k, R5: 4,7k
## Prerequisites
## Prerequisites
* For debugging-purposes serialDebug can be set (before compiling) to ERROR, NOTICE, INFO or DEBUG.
* Make decision, if MQTT should be enabled (enableMqtt)
* If yes, set the IP of the MQTT-server and check the MQTT-topics (states and commands)
* In setup() RFID-cards can be statically linked to an action/file.
* Compile and upload the sketch
* for debugging-purposes serialDebug can be set (before compiling) to ERROR, NOTICE, INFO or DEBUG.
* make decision, if MQTT should be enabled (enableMqtt)
* if yes, set the IP of the MQTT-server and check the MQTT-topics (states and commands)
* in setup() RFID-cards can be statically linked to an action/file. Everything is stored in NVS.
* set NUM_LEDS to the LED-number of your Neopixel-ring.
* please note: Iy using audiobook-mode any playlist-savings will be overwritten with every start unless the RFID-cards in setup() are commented out. Main way to link RFID to an action will be a webservice (still under development)
* compile and upload the sketch
## Starting Tonuino-ESP32 first time
## Starting Tonuino-ESP32 first time
After pluggin in it takes a few seconds until neopixel indicates that uC is ready by four (slow) rotating LEDs. If uC was not able to connect to WiFi, an access-point (named Tonuino) is opened and after connecting this WiFi, a [configuration-Interface](http://192.168.4.1) is available. Enter WiFI-credentials, save them and restart the uC. Then reconnect to your "regular" WiFi. Place to favourite RFID-tag next to the RFID-reader and the music should start to play.
After plugging in it takes a few seconds until neopixel indicates that Tonuino is ready (by four (slow) rotating LEDs). If uC was not able to connect to WiFi, an access-point (named Tonuino) is opened and after connecting this WiFi, a [configuration-Interface](http://192.168.4.1) is available. Enter WiFI-credentials, save them and restart the uC. Then reconnect to your "regular" WiFi. Place to favourite RFID-tag next to the RFID-reader and the music should start to play. While the playlist is generated, fast-rotating LEDs are shown.
## Interacting with Tonuino
## Interacting with Tonuino
### Playmodes
### Playmodes
@ -102,8 +106,8 @@ There are special RFID-tags available, that don't start music by themself but ca
* playlist in loop-mode
* playlist in loop-mode
* track und playlist loop-mode can be activated in parallel, but unless track-loop isn't deactivated, playlist-loop doesn't come into "play"
* track und playlist loop-mode can be activated in parallel, but unless track-loop isn't deactivated, playlist-loop doesn't come into "play"
### Neopixel
Indicates different things:
### Neopixel-ring
Indicates different things. Number of LEDs via NUM_LEDS
Torsten Stauder
5 years ago