phschoen
/
ESPuino
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Added Include-Guards

master
Torsten Stauder 4 years ago
parent
796518271b
commit
6f15f4c0d0
5 changed files with 593 additions and 578 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Unified View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 103
      src/settings-custom.h
  2. 103
      src/settings-espa1s.h
  3. 101
      src/settings-lolin_d32.h
  4. 105
      src/settings-lolin_d32_pro.h
  5. 225
      src/settings.h

103
src/settings-custom.h
View File

@ -1,22 +1,24 @@
#include "Arduino.h"
#ifndef __ESPUINO_SETTINGS_CUSTOM_H__
#define __ESPUINO_SETTINGS_CUSTOM_H__
#include "Arduino.h"
//######################### INFOS ####################################
/* This is not a develboard-specific config-file. It's intended for your own use.
//######################### INFOS ####################################
/* This is not a develboard-specific config-file. It's intended for your own use.
It's been originally derived from lolin32, but just change it according your needs! It's been originally derived from lolin32, but just change it according your needs!
*/
*/
//################## GPIO-configuration ##############################
// Please note: GPIOs 34, 35, 36, 39 are input-only and don't have pullup-resistors.
// So if connecting a button to these, make sure to add a 10k-pullup-resistor for each button.
// Further infos: https://randomnerdtutorials.com/esp32-pinout-reference-gpios/
#ifdef SD_MMC_1BIT_MODE
//################## GPIO-configuration ##############################
// Please note: GPIOs 34, 35, 36, 39 are input-only and don't have pullup-resistors.
// So if connecting a button to these, make sure to add a 10k-pullup-resistor for each button.
// Further infos: https://randomnerdtutorials.com/esp32-pinout-reference-gpios/
#ifdef SD_MMC_1BIT_MODE
// uSD-card-reader (via SD-MMC 1Bit) // uSD-card-reader (via SD-MMC 1Bit)
// //
// SD_MMC uses fixed pins // SD_MMC uses fixed pins
// MOSI 15 // MOSI 15
// SCK 14 // SCK 14
// MISO 2 // MISO 2
#else
#else
// uSD-card-reader (via SPI) // uSD-card-reader (via SPI)
#define SPISD_CS 15 // GPIO for chip select (SD) #define SPISD_CS 15 // GPIO for chip select (SD)
#ifndef SINGLE_SPI_ENABLE #ifndef SINGLE_SPI_ENABLE
@ -24,69 +26,69 @@
#define SPISD_MISO 16 // GPIO for master in slave ou (SD) => not necessary for single-SPI #define SPISD_MISO 16 // GPIO for master in slave ou (SD) => not necessary for single-SPI
#define SPISD_SCK 14 // GPIO for clock-signal (SD) => not necessary for single-SPI #define SPISD_SCK 14 // GPIO for clock-signal (SD) => not necessary for single-SPI
#endif #endif
#endif
#endif
// RFID (via SPI)
#define RST_PIN 99 // Not necessary but has to be set anyway; so let's use a dummy-number
#define RFID_CS 21 // GPIO for chip select (RFID)
#define RFID_MOSI 23 // GPIO for master out slave in (RFID)
#define RFID_MISO 19 // GPIO for master in slave out (RFID)
#define RFID_SCK 18 // GPIO for clock-signal (RFID)
// RFID (via SPI)
#define RST_PIN 99 // Not necessary but has to be set anyway; so let's use a dummy-number
#define RFID_CS 21 // GPIO for chip select (RFID)
#define RFID_MOSI 23 // GPIO for master out slave in (RFID)
#define RFID_MISO 19 // GPIO for master in slave out (RFID)
#define RFID_SCK 18 // GPIO for clock-signal (RFID)
#ifdef RFID_READER_TYPE_PN5180
#ifdef RFID_READER_TYPE_PN5180
#define RFID_BUSY 16 // PN5180 BUSY PIN #define RFID_BUSY 16 // PN5180 BUSY PIN
#define RFID_RST 22 // PN5180 RESET PIN #define RFID_RST 22 // PN5180 RESET PIN
#define RFID_IRQ 39 // PN5180 IRQ PIN (only needed for low power card detection) #define RFID_IRQ 39 // PN5180 IRQ PIN (only needed for low power card detection)
#endif
// I2S (DAC)
#define I2S_DOUT 25 // Digital out (I2S)
#define I2S_BCLK 27 // BCLK (I2S)
#define I2S_LRC 26 // LRC (I2S)
#endif
// I2S (DAC)
#define I2S_DOUT 25 // Digital out (I2S)
#define I2S_BCLK 27 // BCLK (I2S)
#define I2S_LRC 26 // LRC (I2S)
// Rotary encoder
#ifdef USEROTARY_ENABLE
// Rotary encoder
#ifdef USEROTARY_ENABLE
#define DREHENCODER_CLK 34 // If you want to reverse encoder's direction, just switch GPIOs of CLK with DT (in software or hardware) #define DREHENCODER_CLK 34 // If you want to reverse encoder's direction, just switch GPIOs of CLK with DT (in software or hardware)
#define DREHENCODER_DT 35 // Info: Lolin D32 / Lolin D32 pro 35 are using 35 for battery-voltage-monitoring! #define DREHENCODER_DT 35 // Info: Lolin D32 / Lolin D32 pro 35 are using 35 for battery-voltage-monitoring!
#define DREHENCODER_BUTTON 32 // Button 3: is used to switch ESPuino on and off #define DREHENCODER_BUTTON 32 // Button 3: is used to switch ESPuino on and off
#endif
#endif
// Control-buttons (set to 99 to disable)
#define NEXT_BUTTON 4 // Button 0: GPIO to detect next
#define PREVIOUS_BUTTON 2 // Button 1: GPIO to detect previous (Important: as of 19.11.2020 changed from 33 to 2; make sure to change in SD-MMC-mode)
#define PAUSEPLAY_BUTTON 0 // Button 2: GPIO to detect pause/play
#define BUTTON_4 99 // Button 4: unnamed optional button
#define BUTTON_5 99 // Button 5: unnamed optional button
// Control-buttons (set to 99 to disable)
#define NEXT_BUTTON 4 // Button 0: GPIO to detect next
#define PREVIOUS_BUTTON 2 // Button 1: GPIO to detect previous (Important: as of 19.11.2020 changed from 33 to 2; make sure to change in SD-MMC-mode)
#define PAUSEPLAY_BUTTON 0 // Button 2: GPIO to detect pause/play
#define BUTTON_4 99 // Button 4: unnamed optional button
#define BUTTON_5 99 // Button 5: unnamed optional button
// Wake-up button
// Please note: only RTC-GPIOs (0, 4, 12, 13, 14, 15, 25, 26, 27, 32, 33, 34, 35, 36, 39, 99) can be used! Set to 99 to disable.
#define WAKEUP_BUTTON DREHENCODER_BUTTON // Defines the button that is used to wake up ESPuino from deepsleep.
// Wake-up button
// Please note: only RTC-GPIOs (0, 4, 12, 13, 14, 15, 25, 26, 27, 32, 33, 34, 35, 36, 39, 99) can be used! Set to 99 to disable.
#define WAKEUP_BUTTON DREHENCODER_BUTTON // Defines the button that is used to wake up ESPuino from deepsleep.
// (optional) Power-control
#define POWER 17 // GPIO used to drive transistor-circuit, that switches off peripheral devices while ESP32-deepsleep
// (optional) Power-control
#define POWER 17 // GPIO used to drive transistor-circuit, that switches off peripheral devices while ESP32-deepsleep
// (optional) Neopixel
#define LED_PIN 12 // GPIO for Neopixel-signaling
// (optional) Neopixel
#define LED_PIN 12 // GPIO for Neopixel-signaling
// (optinal) Headphone-detection
#ifdef HEADPHONE_ADJUST_ENABLE
// (optinal) Headphone-detection
#ifdef HEADPHONE_ADJUST_ENABLE
#define HP_DETECT 22 // GPIO that detects, if there's a plug in the headphone jack or not #define HP_DETECT 22 // GPIO that detects, if there's a plug in the headphone jack or not
#endif
#endif
// (optional) Monitoring of battery-voltage via ADC
#ifdef MEASURE_BATTERY_VOLTAGE
// (optional) Monitoring of battery-voltage via ADC
#ifdef MEASURE_BATTERY_VOLTAGE
#define VOLTAGE_READ_PIN 33 // GPIO used to monitor battery-voltage. Change to 35 if you're using Lolin D32 or Lolin D32 pro as it's hard-wired there! #define VOLTAGE_READ_PIN 33 // GPIO used to monitor battery-voltage. Change to 35 if you're using Lolin D32 or Lolin D32 pro as it's hard-wired there!
float referenceVoltage = 3.35; // Voltage between 3.3V and GND-pin at the develboard in battery-mode (disconnect USB!) float referenceVoltage = 3.35; // Voltage between 3.3V and GND-pin at the develboard in battery-mode (disconnect USB!)
float offsetVoltage = 0.1; // If voltage measured by ESP isn't 100% accurate, you can add an correction-value here float offsetVoltage = 0.1; // If voltage measured by ESP isn't 100% accurate, you can add an correction-value here
#endif
#endif
// (optional) For measuring battery-voltage a voltage-divider is necessary. Their values need to be configured here.
#ifdef MEASURE_BATTERY_VOLTAGE
// (optional) For measuring battery-voltage a voltage-divider is necessary. Their values need to be configured here.
#ifdef MEASURE_BATTERY_VOLTAGE
uint8_t rdiv1 = 129; // Rdiv1 of voltage-divider (kOhms) (measure exact value with multimeter!) uint8_t rdiv1 = 129; // Rdiv1 of voltage-divider (kOhms) (measure exact value with multimeter!)
uint16_t rdiv2 = 129; // Rdiv2 of voltage-divider (kOhms) (measure exact value with multimeter!) => used to measure voltage via ADC! uint16_t rdiv2 = 129; // Rdiv2 of voltage-divider (kOhms) (measure exact value with multimeter!) => used to measure voltage via ADC!
#endif
#endif
// (Optional) remote control via infrared
#ifdef IR_CONTROL_ENABLE
// (Optional) remote control via infrared
#ifdef IR_CONTROL_ENABLE
#define IRLED_PIN 22 // GPIO where IR-receiver is connected (only tested with VS1838B) #define IRLED_PIN 22 // GPIO where IR-receiver is connected (only tested with VS1838B)
#define IR_DEBOUNCE 200 // Interval in ms to wait at least for next signal (not used for actions volume up/down) #define IR_DEBOUNCE 200 // Interval in ms to wait at least for next signal (not used for actions volume up/down)
@ -103,4 +105,5 @@
#define RC_SHUTDOWN 0x2a // Command for deepsleep #define RC_SHUTDOWN 0x2a // Command for deepsleep
#define RC_BLUETOOTH 0x72 // Command to enable/disable bluetooth #define RC_BLUETOOTH 0x72 // Command to enable/disable bluetooth
#define RC_FTP 0x65 // Command to enable FTP-server #define RC_FTP 0x65 // Command to enable FTP-server
#endif
#endif #endif

103
src/settings-espa1s.h
View File

@ -1,86 +1,88 @@
#include "Arduino.h"
#ifndef __ESPUINO_SETTINGS_ESPA1S_H__
#define __ESPUINO_SETTINGS_ESPA1S_H__
#include "Arduino.h"
//######################### INFOS ####################################
/* This is a develboard-specific config-file for *AI Tinker ESP32-A1S-AudioKit*. It's highly customized and almost certainly
//######################### INFOS ####################################
/* This is a develboard-specific config-file for *AI Tinker ESP32-A1S-AudioKit*. It's highly customized and almost certainly
not suitable for a different develboards. not suitable for a different develboards.
Has a lot of stuff already onboard but needs some soldering rework as there are not all GPIOs exposed Has a lot of stuff already onboard but needs some soldering rework as there are not all GPIOs exposed
PCB: Not necessary. PCB: Not necessary.
Infos: https://github.com/Ai-Thinker-Open/ESP32-A1S-AudioKit Infos: https://github.com/Ai-Thinker-Open/ESP32-A1S-AudioKit
Status: untested Status: untested
*/
*/
//################## GPIO-configuration ##############################
// uSD-card-reader (via SPI)
#define SPISD_CS 13 // GPIO for chip select (SD)
#ifndef SINGLE_SPI_ENABLE
//################## GPIO-configuration ##############################
// uSD-card-reader (via SPI)
#define SPISD_CS 13 // GPIO for chip select (SD)
#ifndef SINGLE_SPI_ENABLE
#define SPISD_MOSI 15 // GPIO for master out slave in (SD) => not necessary for single-SPI #define SPISD_MOSI 15 // GPIO for master out slave in (SD) => not necessary for single-SPI
#define SPISD_MISO 2 // GPIO for master in slave ou (SD) => not necessary for single-SPI #define SPISD_MISO 2 // GPIO for master in slave ou (SD) => not necessary for single-SPI
#define SPISD_SCK 14 // GPIO for clock-signal (SD) => not necessary for single-SPI #define SPISD_SCK 14 // GPIO for clock-signal (SD) => not necessary for single-SPI
#endif
#endif
#define MFRC522_RST_PIN 12 // needed for i2c-comm MTDI on JTAG
#define MFRC522_ADDR 0x28 // default Address of MFRC522
#define ext_IIC_CLK 23 // 14-pin-header
#define ext_IIC_DATA 18 // 14-pin-header
#define MFRC522_RST_PIN 12 // needed for i2c-comm MTDI on JTAG
#define MFRC522_ADDR 0x28 // default Address of MFRC522
#define ext_IIC_CLK 23 // 14-pin-header
#define ext_IIC_DATA 18 // 14-pin-header
// I2S (DAC)
#define I2S_DOUT 25 // Digital out (I2S)
#define I2S_BCLK 27 // BCLK (I2S)
#define I2S_LRC 26 // LRC (I2S)
// I2S (DAC)
#define I2S_DOUT 25 // Digital out (I2S)
#define I2S_BCLK 27 // BCLK (I2S)
#define I2S_LRC 26 // LRC (I2S)
// I2C (AC101)
#define IIC_CLK 32 // internal
#define IIC_DATA 33 // internal
// I2C (AC101)
#define IIC_CLK 32 // internal
#define IIC_DATA 33 // internal
// Amp enable
#define GPIO_PA_EN GPIO_NUM_21 // internal
#define GPIO_SEL_PA_EN GPIO_SEL_21
// Amp enable
#define GPIO_PA_EN GPIO_NUM_21 // internal
#define GPIO_SEL_PA_EN GPIO_SEL_21
// Rotary encoder
#ifdef USEROTARY_ENABLE
// Rotary encoder
#ifdef USEROTARY_ENABLE
#define DREHENCODER_CLK 5 // If you want to reverse encoder's direction, just switch GPIOs of CLK with DT (in software or hardware) #define DREHENCODER_CLK 5 // If you want to reverse encoder's direction, just switch GPIOs of CLK with DT (in software or hardware)
#define DREHENCODER_DT 18 // Info: Lolin D32 / Lolin D32 pro 35 are using 35 for battery-voltage-monitoring! #define DREHENCODER_DT 18 // Info: Lolin D32 / Lolin D32 pro 35 are using 35 for battery-voltage-monitoring!
#define DREHENCODER_BUTTON 4 // Button 3: is used to switch ESPuino on and off #define DREHENCODER_BUTTON 4 // Button 3: is used to switch ESPuino on and off
#endif
#endif
// Control-buttons (set to 99 to disable)
#define NEXT_BUTTON 199 // Button 0: GPIO to detect next
#define PREVIOUS_BUTTON 198 // Button 1: GPIO to detect previous (Important: as of 19.11.2020 changed from 33 to 2; make sure to change in SD-MMC-mode)
#define PAUSEPLAY_BUTTON 36 // Button 2: GPIO to detect pause/play
#define BUTTON_4 99 // Button 4: unnamed optional button
#define BUTTON_5 99 // Button 5: unnamed optional button
// Control-buttons (set to 99 to disable)
#define NEXT_BUTTON 199 // Button 0: GPIO to detect next
#define PREVIOUS_BUTTON 198 // Button 1: GPIO to detect previous (Important: as of 19.11.2020 changed from 33 to 2; make sure to change in SD-MMC-mode)
#define PAUSEPLAY_BUTTON 36 // Button 2: GPIO to detect pause/play
#define BUTTON_4 99 // Button 4: unnamed optional button
#define BUTTON_5 99 // Button 5: unnamed optional button
// Wake-up button
// Please note: only RTC-GPIOs (0, 4, 12, 13, 14, 15, 25, 26, 27, 32, 33, 34, 35, 36, 39, 99) can be used! Set to 99 to disable.
#define WAKEUP_BUTTON DREHENCODER_BUTTON // Defines the button that is used to wake up ESPuino from deepsleep.
// Wake-up button
// Please note: only RTC-GPIOs (0, 4, 12, 13, 14, 15, 25, 26, 27, 32, 33, 34, 35, 36, 39, 99) can be used! Set to 99 to disable.
#define WAKEUP_BUTTON DREHENCODER_BUTTON // Defines the button that is used to wake up ESPuino from deepsleep.
// Power-control
#define POWER 19 // GPIO used to drive transistor-circuit, that switches off peripheral devices while ESP32-deepsleep
// Power-control
#define POWER 19 // GPIO used to drive transistor-circuit, that switches off peripheral devices while ESP32-deepsleep
// (optional) Neopixel
#define LED_PIN 23 // GPIO for Neopixel-signaling
// (optional) Neopixel
#define LED_PIN 23 // GPIO for Neopixel-signaling
// (optinal) Headphone-detection
#ifdef HEADPHONE_ADJUST_ENABLE
// (optinal) Headphone-detection
#ifdef HEADPHONE_ADJUST_ENABLE
#define HP_DETECT 39 // GPIO that detects, if there's a plug in the headphone jack or not #define HP_DETECT 39 // GPIO that detects, if there's a plug in the headphone jack or not
#endif
#endif
// (optional) Monitoring of battery-voltage via ADC
#ifdef MEASURE_BATTERY_VOLTAGE
// (optional) Monitoring of battery-voltage via ADC
#ifdef MEASURE_BATTERY_VOLTAGE
#define VOLTAGE_READ_PIN 33 // GPIO used to monitor battery-voltage. Change to 35 if you're using Lolin D32 or Lolin D32 pro as it's hard-wired there! #define VOLTAGE_READ_PIN 33 // GPIO used to monitor battery-voltage. Change to 35 if you're using Lolin D32 or Lolin D32 pro as it's hard-wired there!
float referenceVoltage = 3.30; // Voltage between 3.3V and GND-pin at the develboard in battery-mode (disconnect USB!) float referenceVoltage = 3.30; // Voltage between 3.3V and GND-pin at the develboard in battery-mode (disconnect USB!)
float offsetVoltage = 0.1; // If voltage measured by ESP isn't 100% accurate, you can add an correction-value here float offsetVoltage = 0.1; // If voltage measured by ESP isn't 100% accurate, you can add an correction-value here
#endif
#endif
// (optional) For measuring battery-voltage a voltage-divider is necessary. Their values need to be configured here.
#ifdef MEASURE_BATTERY_VOLTAGE
// (optional) For measuring battery-voltage a voltage-divider is necessary. Their values need to be configured here.
#ifdef MEASURE_BATTERY_VOLTAGE
uint8_t rdiv1 = 129; // Rdiv1 of voltage-divider (kOhms) (measure exact value with multimeter!) uint8_t rdiv1 = 129; // Rdiv1 of voltage-divider (kOhms) (measure exact value with multimeter!)
uint16_t rdiv2 = 389; // Rdiv2 of voltage-divider (kOhms) (measure exact value with multimeter!) => used to measure voltage via ADC! uint16_t rdiv2 = 389; // Rdiv2 of voltage-divider (kOhms) (measure exact value with multimeter!) => used to measure voltage via ADC!
#endif
#endif
// (Optional) remote control via infrared
#ifdef IR_CONTROL_ENABLE
// (Optional) remote control via infrared
#ifdef IR_CONTROL_ENABLE
#define IRLED_PIN 22 // GPIO where IR-receiver is connected (only tested with VS1838B) #define IRLED_PIN 22 // GPIO where IR-receiver is connected (only tested with VS1838B)
#define IR_DEBOUNCE 200 // Interval in ms to wait at least for next signal (not used for actions volume up/down) #define IR_DEBOUNCE 200 // Interval in ms to wait at least for next signal (not used for actions volume up/down)
@ -97,4 +99,5 @@
#define RC_SHUTDOWN 0x2a // Command for deepsleep #define RC_SHUTDOWN 0x2a // Command for deepsleep
#define RC_BLUETOOTH 0x72 // Command to enable/disable bluetooth #define RC_BLUETOOTH 0x72 // Command to enable/disable bluetooth
#define RC_FTP 0x65 // Command to enable FTP-server #define RC_FTP 0x65 // Command to enable FTP-server
#endif
#endif #endif

101
src/settings-lolin_d32.h
View File

@ -1,7 +1,9 @@
#include "Arduino.h"
#ifndef __ESPUINO_SETTINGS_LOLIN_D32_H__
#define __ESPUINO_SETTINGS_LOLIN_D32_H__
#include "Arduino.h"
//######################### INFOS ####################################
/* This is a develboard-specific config-file for *Wemos Lolin D32*. Specific doesn't mean it's only working with this board.
//######################### INFOS ####################################
/* This is a develboard-specific config-file for *Wemos Lolin D32*. Specific doesn't mean it's only working with this board.
Lolin D32 is the successor of Lolin32 and the "little brother" of Wemos Lolin D32 pro. Lolin D32 is the successor of Lolin32 and the "little brother" of Wemos Lolin D32 pro.
PCB: https://github.com/biologist79/ESPuino/tree/master/PCBs/Wemos%20Lolin%20D32 PCB: https://github.com/biologist79/ESPuino/tree/master/PCBs/Wemos%20Lolin%20D32
Infos: https://www.wemos.cc/en/latest/d32/d32.html Infos: https://www.wemos.cc/en/latest/d32/d32.html
@ -9,21 +11,21 @@
Caveats: GPIO35 (battery monitoring) can't be changed, it's built in Caveats: GPIO35 (battery monitoring) can't be changed, it's built in
Status: Status:
tested with 2x SPI: RC522 & SD (by biologist79) tested with 2x SPI: RC522 & SD (by biologist79)
*/
*/
//################## GPIO-configuration ##############################
// Please note: GPIOs 34, 35, 36, 39 are input-only and don't have pullup-resistors.
// So if connecting a button to these, make sure to add a 10k-pullup-resistor for each button.
// Further infos: https://randomnerdtutorials.com/esp32-pinout-reference-gpios/
#ifdef SD_MMC_1BIT_MODE
//################## GPIO-configuration ##############################
// Please note: GPIOs 34, 35, 36, 39 are input-only and don't have pullup-resistors.
// So if connecting a button to these, make sure to add a 10k-pullup-resistor for each button.
// Further infos: https://randomnerdtutorials.com/esp32-pinout-reference-gpios/
#ifdef SD_MMC_1BIT_MODE
// uSD-card-reader (via SD-MMC 1Bit) // uSD-card-reader (via SD-MMC 1Bit)
// //
// SD_MMC uses fixed pins // SD_MMC uses fixed pins
// MOSI 15 // MOSI 15
// SCK 14 // SCK 14
// MISO 2 // MISO 2
#else
#else
// uSD-card-reader (via SPI) // uSD-card-reader (via SPI)
#define SPISD_CS 15 // GPIO for chip select (SD) #define SPISD_CS 15 // GPIO for chip select (SD)
#ifndef SINGLE_SPI_ENABLE #ifndef SINGLE_SPI_ENABLE
@ -31,68 +33,68 @@
#define SPISD_MISO 16 // GPIO for master in slave ou (SD) => not necessary for single-SPI #define SPISD_MISO 16 // GPIO for master in slave ou (SD) => not necessary for single-SPI
#define SPISD_SCK 14 // GPIO for clock-signal (SD) => not necessary for single-SPI #define SPISD_SCK 14 // GPIO for clock-signal (SD) => not necessary for single-SPI
#endif #endif
#endif
#endif
// RFID (via SPI)
#define RST_PIN 99 // Not necessary but has to be set anyway; so let's use a dummy-number
#define RFID_CS 21 // GPIO for chip select (RFID)
#define RFID_MOSI 23 // GPIO for master out slave in (RFID)
#define RFID_MISO 19 // GPIO for master in slave out (RFID)
#define RFID_SCK 18 // GPIO for clock-signal (RFID)
// RFID (via SPI)
#define RST_PIN 99 // Not necessary but has to be set anyway; so let's use a dummy-number
#define RFID_CS 21 // GPIO for chip select (RFID)
#define RFID_MOSI 23 // GPIO for master out slave in (RFID)
#define RFID_MISO 19 // GPIO for master in slave out (RFID)
#define RFID_SCK 18 // GPIO for clock-signal (RFID)
#ifdef RFID_READER_TYPE_PN5180
#ifdef RFID_READER_TYPE_PN5180
#define RFID_BUSY 16 // PN5180 BUSY PIN #define RFID_BUSY 16 // PN5180 BUSY PIN
#define RFID_RST 22 // PN5180 RESET PIN #define RFID_RST 22 // PN5180 RESET PIN
#define RFID_IRQ 39 // PN5180 IRQ PIN (only needed for low power card detection) #define RFID_IRQ 39 // PN5180 IRQ PIN (only needed for low power card detection)
#endif
// I2S (DAC)
#define I2S_DOUT 25 // Digital out (I2S)
#define I2S_BCLK 27 // BCLK (I2S)
#define I2S_LRC 26 // LRC (I2S)
#endif
// I2S (DAC)
#define I2S_DOUT 25 // Digital out (I2S)
#define I2S_BCLK 27 // BCLK (I2S)
#define I2S_LRC 26 // LRC (I2S)
// Rotary encoder
#ifdef USEROTARY_ENABLE
// Rotary encoder
#ifdef USEROTARY_ENABLE
#define DREHENCODER_CLK 34 // If you want to reverse encoder's direction, just switch GPIOs of CLK with DT (in software or hardware) #define DREHENCODER_CLK 34 // If you want to reverse encoder's direction, just switch GPIOs of CLK with DT (in software or hardware)
#define DREHENCODER_DT 33 // Info: Lolin D32 is using 35 for battery-voltage-monitoring! #define DREHENCODER_DT 33 // Info: Lolin D32 is using 35 for battery-voltage-monitoring!
#define DREHENCODER_BUTTON 32 // Button is used to switch ESPuino on and off #define DREHENCODER_BUTTON 32 // Button is used to switch ESPuino on and off
#endif
#endif
// Control-buttons (set to 99 to disable)
#define NEXT_BUTTON 4 // Button 0: GPIO to detect next
#define PREVIOUS_BUTTON 2 // Button 1: GPIO to detect previous (Important: as of 19.11.2020 changed from 33 to 2; make sure to change in SD-MMC-mode)
#define PAUSEPLAY_BUTTON 5 // Button 2: GPIO to detect pause/play
#define BUTTON_4 99 // Button 4: unnamed optional button
#define BUTTON_5 99 // Button 5: unnamed optional button
// Control-buttons (set to 99 to disable)
#define NEXT_BUTTON 4 // Button 0: GPIO to detect next
#define PREVIOUS_BUTTON 2 // Button 1: GPIO to detect previous (Important: as of 19.11.2020 changed from 33 to 2; make sure to change in SD-MMC-mode)
#define PAUSEPLAY_BUTTON 5 // Button 2: GPIO to detect pause/play
#define BUTTON_4 99 // Button 4: unnamed optional button
#define BUTTON_5 99 // Button 5: unnamed optional button
// Wake-up button
// Please note: only RTC-GPIOs (0, 4, 12, 13, 14, 15, 25, 26, 27, 32, 33, 34, 35, 36, 39, 99) can be used! Set to 99 to disable.
#define WAKEUP_BUTTON DREHENCODER_BUTTON // Defines the button that is used to wake up ESPuino from deepsleep.
// Wake-up button
// Please note: only RTC-GPIOs (0, 4, 12, 13, 14, 15, 25, 26, 27, 32, 33, 34, 35, 36, 39, 99) can be used! Set to 99 to disable.
#define WAKEUP_BUTTON DREHENCODER_BUTTON // Defines the button that is used to wake up ESPuino from deepsleep.
// (optional) Power-control
#define POWER 17 // GPIO used to drive transistor-circuit, that switches off peripheral devices while ESP32-deepsleep
// (optional) Power-control
#define POWER 17 // GPIO used to drive transistor-circuit, that switches off peripheral devices while ESP32-deepsleep
// (optional) Neopixel
#define LED_PIN 12 // GPIO for Neopixel-signaling
// (optional) Neopixel
#define LED_PIN 12 // GPIO for Neopixel-signaling
// (optinal) Headphone-detection
#ifdef HEADPHONE_ADJUST_ENABLE
// (optinal) Headphone-detection
#ifdef HEADPHONE_ADJUST_ENABLE
#define HP_DETECT 22 // GPIO that detects, if there's a plug in the headphone jack or not #define HP_DETECT 22 // GPIO that detects, if there's a plug in the headphone jack or not
#endif
#endif
// (optional) Monitoring of battery-voltage via ADC
#ifdef MEASURE_BATTERY_VOLTAGE
// (optional) Monitoring of battery-voltage via ADC
#ifdef MEASURE_BATTERY_VOLTAGE
#define VOLTAGE_READ_PIN 35 // Cannot be changed, it's built in #define VOLTAGE_READ_PIN 35 // Cannot be changed, it's built in
float referenceVoltage = 3.30; // Voltage between 3.3V and GND-pin at the develboard in battery-mode (disconnect USB!) float referenceVoltage = 3.30; // Voltage between 3.3V and GND-pin at the develboard in battery-mode (disconnect USB!)
float offsetVoltage = 0.2; // If voltage measured by ESP isn't 100% accurate, you can add an correction-value here float offsetVoltage = 0.2; // If voltage measured by ESP isn't 100% accurate, you can add an correction-value here
#endif
#endif
#ifdef MEASURE_BATTERY_VOLTAGE
#ifdef MEASURE_BATTERY_VOLTAGE
uint8_t rdiv1 = 100; // Cannot be changed, it's built in uint8_t rdiv1 = 100; // Cannot be changed, it's built in
uint16_t rdiv2 = 100; // Cannot be changed, it's built in uint16_t rdiv2 = 100; // Cannot be changed, it's built in
#endif
#endif
// (Optional) remote control via infrared
#ifdef IR_CONTROL_ENABLE
// (Optional) remote control via infrared
#ifdef IR_CONTROL_ENABLE
#define IRLED_PIN 22 // GPIO where IR-receiver is connected (only tested with VS1838B) #define IRLED_PIN 22 // GPIO where IR-receiver is connected (only tested with VS1838B)
#define IR_DEBOUNCE 200 // Interval in ms to wait at least for next signal (not used for actions volume up/down) #define IR_DEBOUNCE 200 // Interval in ms to wait at least for next signal (not used for actions volume up/down)
@ -109,4 +111,5 @@
#define RC_SHUTDOWN 0x2a // Command for deepsleep #define RC_SHUTDOWN 0x2a // Command for deepsleep
#define RC_BLUETOOTH 0x72 // Command to enable/disable bluetooth #define RC_BLUETOOTH 0x72 // Command to enable/disable bluetooth
#define RC_FTP 0x65 // Command to enable FTP-server #define RC_FTP 0x65 // Command to enable FTP-server
#endif
#endif #endif

105
src/settings-lolin_d32_pro.h
View File

@ -1,7 +1,9 @@
#include "Arduino.h"
#ifndef __ESPUINO_SETTINGS_LOLIN_D32_PRO_H__
#define __ESPUINO_SETTINGS_LOLIN_D32_PRO_H__
#include "Arduino.h"
//######################### INFOS ####################################
/* This is a develboard-specific config-file for *Wemos Lolin32*. Specific doesn't mean it's only working with this board.
//######################### INFOS ####################################
/* This is a develboard-specific config-file for *Wemos Lolin32*. Specific doesn't mean it's only working with this board.
Lolin32 is the predecessor of Lolin D32. Lolin32 is the predecessor of Lolin D32.
PCB: None so far PCB: None so far
Infos: https://www.wemos.cc/en/latest/d32/d32_pro.html Infos: https://www.wemos.cc/en/latest/d32/d32_pro.html
@ -9,16 +11,16 @@
Caveats: GPIO35 (battery monitoring) + SD can't be changed, it's built in (and because of the SD-pinout used, it is not compatible with MMC-mode) Caveats: GPIO35 (battery monitoring) + SD can't be changed, it's built in (and because of the SD-pinout used, it is not compatible with MMC-mode)
Status: Status:
tested with 2xSPI: RC522 & SD (by biologist79) tested with 2xSPI: RC522 & SD (by biologist79)
*/
*/
//################## GPIO-configuration ##############################
// Please note: GPIOs 34, 35, 36, 39 are input-only and don't have pullup-resistors.
// So if connecting a button to these, make sure to add a 10k-pullup-resistor for each button.
// Further infos: https://randomnerdtutorials.com/esp32-pinout-reference-gpios/
// GPIOs 16+17 are not available for D32 pro as they're used to internal purposes (PSRAM).
#ifdef SD_MMC_1BIT_MODE
//################## GPIO-configuration ##############################
// Please note: GPIOs 34, 35, 36, 39 are input-only and don't have pullup-resistors.
// So if connecting a button to these, make sure to add a 10k-pullup-resistor for each button.
// Further infos: https://randomnerdtutorials.com/esp32-pinout-reference-gpios/
// GPIOs 16+17 are not available for D32 pro as they're used to internal purposes (PSRAM).
#ifdef SD_MMC_1BIT_MODE
// NOT SUPPORTED BY D32 pro as 15 / 14 / 2 doesn't match D32 pro's SD-pinout // NOT SUPPORTED BY D32 pro as 15 / 14 / 2 doesn't match D32 pro's SD-pinout
#else
#else
// uSD-card-reader (via SPI) => Cannot be changed, it's built in! // uSD-card-reader (via SPI) => Cannot be changed, it's built in!
#define SPISD_CS 4 // GPIO for chip select (SD) #define SPISD_CS 4 // GPIO for chip select (SD)
#ifndef SINGLE_SPI_ENABLE #ifndef SINGLE_SPI_ENABLE
@ -26,69 +28,69 @@
#define SPISD_MISO 19 // GPIO for master in slave ou (SD) => not necessary for single-SPI #define SPISD_MISO 19 // GPIO for master in slave ou (SD) => not necessary for single-SPI
#define SPISD_SCK 18 // GPIO for clock-signal (SD) => not necessary for single-SPI #define SPISD_SCK 18 // GPIO for clock-signal (SD) => not necessary for single-SPI
#endif #endif
#endif
#endif
// RFID (via SPI)
#define RST_PIN 99 // Not necessary but has to be set anyway; so let's use a dummy-number
#define RFID_CS 21 // GPIO for chip select (RFID)
#define RFID_MOSI 13 // GPIO for master out slave in (RFID)
#define RFID_MISO 15 // GPIO for master in slave out (RFID)
#define RFID_SCK 14 // GPIO for clock-signal (RFID)
// RFID (via SPI)
#define RST_PIN 99 // Not necessary but has to be set anyway; so let's use a dummy-number
#define RFID_CS 21 // GPIO for chip select (RFID)
#define RFID_MOSI 13 // GPIO for master out slave in (RFID)
#define RFID_MISO 15 // GPIO for master in slave out (RFID)
#define RFID_SCK 14 // GPIO for clock-signal (RFID)
#ifdef RFID_READER_TYPE_PN5180
#ifdef RFID_READER_TYPE_PN5180
#define RFID_BUSY 33 // PN5180 BUSY PIN #define RFID_BUSY 33 // PN5180 BUSY PIN
#define RFID_RST 22 // PN5180 RESET PIN #define RFID_RST 22 // PN5180 RESET PIN
#define RFID_IRQ 39 // PN5180 IRQ PIN (only needed for low power card detection) #define RFID_IRQ 39 // PN5180 IRQ PIN (only needed for low power card detection)
#endif
// I2S (DAC)
#define I2S_DOUT 25 // Digital out (I2S)
#define I2S_BCLK 27 // BCLK (I2S)
#define I2S_LRC 26 // LRC (I2S)
#endif
// I2S (DAC)
#define I2S_DOUT 25 // Digital out (I2S)
#define I2S_BCLK 27 // BCLK (I2S)
#define I2S_LRC 26 // LRC (I2S)
// Rotary encoder
#ifdef USEROTARY_ENABLE
// Rotary encoder
#ifdef USEROTARY_ENABLE
#define DREHENCODER_CLK 34 // If you want to reverse encoder's direction, just switch GPIOs of CLK with DT (in software or hardware) #define DREHENCODER_CLK 34 // If you want to reverse encoder's direction, just switch GPIOs of CLK with DT (in software or hardware)
#define DREHENCODER_DT 39 // 39 = 'VN'; Info: Lolin D32 pro is using 35 for battery-voltage-monitoring! #define DREHENCODER_DT 39 // 39 = 'VN'; Info: Lolin D32 pro is using 35 for battery-voltage-monitoring!
#define DREHENCODER_BUTTON 36 // Button 3: is used to switch ESPuino on and off; 36 = 'VP' #define DREHENCODER_BUTTON 36 // Button 3: is used to switch ESPuino on and off; 36 = 'VP'
#endif
#endif
// Control-buttons (set to 99 to disable)
#define NEXT_BUTTON 0 // Button 0: GPIO to detect next
#define PREVIOUS_BUTTON 2 // Button 1: GPIO to detect previous (Important: as of 19.11.2020 changed from 33 to 2; make sure to change in SD-MMC-mode)
#define PAUSEPLAY_BUTTON 32 // Button 2: GPIO to detect pause/play
#define BUTTON_4 99 // Button 4: unnamed optional button
#define BUTTON_5 99 // Button 5: unnamed optional button
// Control-buttons (set to 99 to disable)
#define NEXT_BUTTON 0 // Button 0: GPIO to detect next
#define PREVIOUS_BUTTON 2 // Button 1: GPIO to detect previous (Important: as of 19.11.2020 changed from 33 to 2; make sure to change in SD-MMC-mode)
#define PAUSEPLAY_BUTTON 32 // Button 2: GPIO to detect pause/play
#define BUTTON_4 99 // Button 4: unnamed optional button
#define BUTTON_5 99 // Button 5: unnamed optional button
// Wake-up button
// Please note: only RTC-GPIOs (0, 4, 12, 13, 14, 15, 25, 26, 27, 32, 33, 34, 35, 36, 39, 99) can be used! Set to 99 to disable.
#define WAKEUP_BUTTON DREHENCODER_BUTTON // Defines the button that is used to wake up ESPuino from deepsleep.
// Wake-up button
// Please note: only RTC-GPIOs (0, 4, 12, 13, 14, 15, 25, 26, 27, 32, 33, 34, 35, 36, 39, 99) can be used! Set to 99 to disable.
#define WAKEUP_BUTTON DREHENCODER_BUTTON // Defines the button that is used to wake up ESPuino from deepsleep.
// (optional) Power-control
#define POWER 5 // GPIO used to drive transistor-circuit, that switches off peripheral devices while ESP32-deepsleep
// (optional) Power-control
#define POWER 5 // GPIO used to drive transistor-circuit, that switches off peripheral devices while ESP32-deepsleep
// (optional) Neopixel
#define LED_PIN 12 // GPIO for Neopixel-signaling
// (optional) Neopixel
#define LED_PIN 12 // GPIO for Neopixel-signaling
// (optinal) Headphone-detection
#ifdef HEADPHONE_ADJUST_ENABLE
// (optinal) Headphone-detection
#ifdef HEADPHONE_ADJUST_ENABLE
#define HP_DETECT 22 // GPIO that detects, if there's a plug in the headphone jack or not #define HP_DETECT 22 // GPIO that detects, if there's a plug in the headphone jack or not
#endif
#endif
// (optional) Monitoring of battery-voltage via ADC
#ifdef MEASURE_BATTERY_VOLTAGE
// (optional) Monitoring of battery-voltage via ADC
#ifdef MEASURE_BATTERY_VOLTAGE
#define VOLTAGE_READ_PIN 35 // GPIO used to monitor battery-voltage. Cannot be changed, it's built in #define VOLTAGE_READ_PIN 35 // GPIO used to monitor battery-voltage. Cannot be changed, it's built in
float referenceVoltage = 3.30; // Voltage between 3.3V and GND-pin at the develboard in battery-mode (disconnect USB!) float referenceVoltage = 3.30; // Voltage between 3.3V and GND-pin at the develboard in battery-mode (disconnect USB!)
float offsetVoltage = 0.1; // If voltage measured by ESP isn't 100% accurate, you can add an correction-value here float offsetVoltage = 0.1; // If voltage measured by ESP isn't 100% accurate, you can add an correction-value here
#endif
#endif
// (optional) For measuring battery-voltage a voltage-divider is already onboard. Connect a LiPo and use it!
#ifdef MEASURE_BATTERY_VOLTAGE
// (optional) For measuring battery-voltage a voltage-divider is already onboard. Connect a LiPo and use it!
#ifdef MEASURE_BATTERY_VOLTAGE
uint8_t rdiv1 = 100; // Cannot be changed, it's built in uint8_t rdiv1 = 100; // Cannot be changed, it's built in
uint16_t rdiv2 = 100; // Cannot be changed, it's built in uint16_t rdiv2 = 100; // Cannot be changed, it's built in
#endif
#endif
// (Optional) remote control via infrared
#ifdef IR_CONTROL_ENABLE
// (Optional) remote control via infrared
#ifdef IR_CONTROL_ENABLE
#define IRLED_PIN 22 // GPIO where IR-receiver is connected (only tested with VS1838B) #define IRLED_PIN 22 // GPIO where IR-receiver is connected (only tested with VS1838B)
#define IR_DEBOUNCE 200 // Interval in ms to wait at least for next signal (not used for actions volume up/down) #define IR_DEBOUNCE 200 // Interval in ms to wait at least for next signal (not used for actions volume up/down)
@ -105,4 +107,5 @@
#define RC_SHUTDOWN 0x2a // Command for deepsleep #define RC_SHUTDOWN 0x2a // Command for deepsleep
#define RC_BLUETOOTH 0x72 // Command to enable/disable bluetooth #define RC_BLUETOOTH 0x72 // Command to enable/disable bluetooth
#define RC_FTP 0x65 // Command to enable FTP-server #define RC_FTP 0x65 // Command to enable FTP-server
#endif
#endif #endif

225
src/settings.h
View File

@ -1,11 +1,13 @@
#include "Arduino.h"
#include "values.h"
#ifndef __ESPUINO_SETTINGS_H__
#define __ESPUINO_SETTINGS_H__
#include "Arduino.h"
#include "values.h"
//######################### INFOS ####################################
// This is the general configfile for ESPuino-configuration.
//######################### INFOS ####################################
// This is the general configfile for ESPuino-configuration.
//################## HARDWARE-PLATFORM ###############################
/* Make sure to also edit the configfile, that is specific for your platform.
//################## HARDWARE-PLATFORM ###############################
/* Make sure to also edit the configfile, that is specific for your platform.
If in doubts (your develboard is not listed) use HAL 1 If in doubts (your develboard is not listed) use HAL 1
1: Wemos Lolin32 => settings-lolin32.h 1: Wemos Lolin32 => settings-lolin32.h
2: ESP32-A1S Audiokit => settings-espa1s.h 2: ESP32-A1S Audiokit => settings-espa1s.h
@ -13,49 +15,49 @@
4: Wemos Lolin D32 pro => settings-lolin_D32_pro.h 4: Wemos Lolin D32 pro => settings-lolin_D32_pro.h
99: custom => settings-custom.h 99: custom => settings-custom.h
more to come... more to come...
*/
*/
#define HAL 1 // HAL 1 = LoLin32, 2 = ESP32-A1S-AudioKit, 3 = Lolin D32, 4 = Lolin D32 pro; 99 = custom #define HAL 1 // HAL 1 = LoLin32, 2 = ESP32-A1S-AudioKit, 3 = Lolin D32, 4 = Lolin D32 pro; 99 = custom
//########################## MODULES #################################
#define MDNS_ENABLE // When enabled, you don't have to handle with ESPuino's IP-address. If hostname is set to "ESPuino", you can reach it via ESPuino.local
#define MQTT_ENABLE // Make sure to configure mqtt-server and (optionally) username+pwd
#define FTP_ENABLE // Enables FTP-server; DON'T FORGET TO ACTIVATE AFTER BOOT BY PRESSING PAUSE + NEXT-BUTTONS (IN PARALLEL)!
#define NEOPIXEL_ENABLE // Don't forget configuration of NUM_LEDS if enabled
//#define NEOPIXEL_REVERSE_ROTATION // Some Neopixels are adressed/soldered counter-clockwise. This can be configured here.
#define LANGUAGE 1 // 1 = deutsch; 2 = english
//#define STATIC_IP_ENABLE // Enables static IP-configuration (change static ip-section accordingly)
//#define HEADPHONE_ADJUST_ENABLE // Used to adjust (lower) volume for optional headphone-pcb (refer maxVolumeSpeaker / maxVolumeHeadphone)
#define SHUTDOWN_IF_SD_BOOT_FAILS // Will put ESP to deepsleep if boot fails due to SD. Really recommend this if there's in battery-mode no other way to restart ESP! Interval adjustable via deepsleepTimeAfterBootFails.
#define MEASURE_BATTERY_VOLTAGE // Enables battery-measurement via GPIO (ADC) and voltage-divider
//#define PLAY_LAST_RFID_AFTER_REBOOT // When restarting ESPuino, the last RFID that was active before, is recalled and played
//#define USE_LAST_VOLUME_AFTER_REBOOT // Remembers the volume used at last shutdown after reboot
#define USEROTARY_ENABLE // If rotary-encoder is used (don't forget to review WAKEUP_BUTTON if you disable this feature!)
#define BLUETOOTH_ENABLE // If enabled and bluetooth-mode is active, you can stream to your ESPuino via bluetooth (a2dp-sink).
//#define IR_CONTROL_ENABLE // Enables remote control
//########################## MODULES #################################
#define MDNS_ENABLE // When enabled, you don't have to handle with ESPuino's IP-address. If hostname is set to "ESPuino", you can reach it via ESPuino.local
#define MQTT_ENABLE // Make sure to configure mqtt-server and (optionally) username+pwd
#define FTP_ENABLE // Enables FTP-server; DON'T FORGET TO ACTIVATE AFTER BOOT BY PRESSING PAUSE + NEXT-BUTTONS (IN PARALLEL)!
#define NEOPIXEL_ENABLE // Don't forget configuration of NUM_LEDS if enabled
//#define NEOPIXEL_REVERSE_ROTATION // Some Neopixels are adressed/soldered counter-clockwise. This can be configured here.
#define LANGUAGE 1 // 1 = deutsch; 2 = english
//#define STATIC_IP_ENABLE // Enables static IP-configuration (change static ip-section accordingly)
//#define HEADPHONE_ADJUST_ENABLE // Used to adjust (lower) volume for optional headphone-pcb (refer maxVolumeSpeaker / maxVolumeHeadphone)
#define SHUTDOWN_IF_SD_BOOT_FAILS // Will put ESP to deepsleep if boot fails due to SD. Really recommend this if there's in battery-mode no other way to restart ESP! Interval adjustable via deepsleepTimeAfterBootFails.
#define MEASURE_BATTERY_VOLTAGE // Enables battery-measurement via GPIO (ADC) and voltage-divider
//#define PLAY_LAST_RFID_AFTER_REBOOT // When restarting ESPuino, the last RFID that was active before, is recalled and played
//#define USE_LAST_VOLUME_AFTER_REBOOT // Remembers the volume used at last shutdown after reboot
#define USEROTARY_ENABLE // If rotary-encoder is used (don't forget to review WAKEUP_BUTTON if you disable this feature!)
#define BLUETOOTH_ENABLE // If enabled and bluetooth-mode is active, you can stream to your ESPuino via bluetooth (a2dp-sink).
//#define IR_CONTROL_ENABLE // Enables remote control
//################## select SD card mode #############################
//#define SD_MMC_1BIT_MODE // run SD card in SD-MMC 1Bit mode
//#define SINGLE_SPI_ENABLE // If only one SPI-instance should be used instead of two (not yet working!) (Works on ESP32-A1S with RFID via I2C)
//################## select SD card mode #############################
//#define SD_MMC_1BIT_MODE // run SD card in SD-MMC 1Bit mode
//#define SINGLE_SPI_ENABLE // If only one SPI-instance should be used instead of two (not yet working!) (Works on ESP32-A1S with RFID via I2C)
//################## select RFID reader ##############################
#define RFID_READER_TYPE_MFRC522_SPI // use MFRC522 via SPI
//#define RFID_READER_TYPE_MFRC522_I2C // use MFRC522 via I2C
//#define RFID_READER_TYPE_PN5180 // use PN5180
//################## select RFID reader ##############################
#define RFID_READER_TYPE_MFRC522_SPI // use MFRC522 via SPI
//#define RFID_READER_TYPE_MFRC522_I2C // use MFRC522 via I2C
//#define RFID_READER_TYPE_PN5180 // use PN5180
#ifdef RFID_READER_TYPE_PN5180
#ifdef RFID_READER_TYPE_PN5180
//#define PN5180_ENABLE_LPCD // enable PN5180 low power card detection. Wakes up ESPuino if RFID-tag was applied while deepsleep is active. //#define PN5180_ENABLE_LPCD // enable PN5180 low power card detection. Wakes up ESPuino if RFID-tag was applied while deepsleep is active.
#endif
#endif
#ifdef RFID_READER_TYPE_MFRC522_SPI
#ifdef RFID_READER_TYPE_MFRC522_SPI
uint8_t rfidGain = 0x07 << 4; // Sensitivity of RC522. For possible values see reference: https://forum.espuino.de/uploads/default/original/1X/9de5f8d35cbc123c1378cad1beceb3f51035cec0.png uint8_t rfidGain = 0x07 << 4; // Sensitivity of RC522. For possible values see reference: https://forum.espuino.de/uploads/default/original/1X/9de5f8d35cbc123c1378cad1beceb3f51035cec0.png
#endif
#endif
//################## BUTTON-Layout ##################################
/* German documentation: https://forum.espuino.de/t/das-dynamische-button-layout/224
//################## BUTTON-Layout ##################################
/* German documentation: https://forum.espuino.de/t/das-dynamische-button-layout/224
Please note the following numbers as you need to know them in order to define actions for buttons. Please note the following numbers as you need to know them in order to define actions for buttons.
Even if you don't use all of them, their numbers won't change Even if you don't use all of them, their numbers won't change
0: NEXT_BUTTON 0: NEXT_BUTTON
@ -80,101 +82,101 @@
To all of those buttons, an action can be assigned freely. To all of those buttons, an action can be assigned freely.
Please have a look at values.h to look up actions available (>=100 can be used) Please have a look at values.h to look up actions available (>=100 can be used)
If you don't want to assign an action or you don't use a given button: CMD_NOTHING has to be set If you don't want to assign an action or you don't use a given button: CMD_NOTHING has to be set
*/
// *****BUTTON***** *****ACTION*****
#define BUTTON_0_SHORT CMD_NEXTTRACK
#define BUTTON_1_SHORT CMD_PREVTRACK
#define BUTTON_2_SHORT CMD_PLAYPAUSE
#define BUTTON_3_SHORT CMD_MEASUREBATTERY
#define BUTTON_4_SHORT CMD_NOTHING
#define BUTTON_5_SHORT CMD_NOTHING
#define BUTTON_0_LONG CMD_LASTTRACK
#define BUTTON_1_LONG CMD_FIRSTTRACK
#define BUTTON_2_LONG CMD_PLAYPAUSE
#define BUTTON_3_LONG CMD_SLEEPMODE
#define BUTTON_4_LONG CMD_NOTHING
#define BUTTON_5_LONG CMD_NOTHING
#define BUTTON_MULTI_01 TOGGLE_WIFI_STATUS
#define BUTTON_MULTI_02 ENABLE_FTP_SERVER
#define BUTTON_MULTI_03 CMD_NOTHING
#define BUTTON_MULTI_04 CMD_NOTHING
#define BUTTON_MULTI_05 CMD_NOTHING
#define BUTTON_MULTI_12 CMD_NOTHING
#define BUTTON_MULTI_13 CMD_NOTHING
#define BUTTON_MULTI_14 CMD_NOTHING
#define BUTTON_MULTI_15 CMD_NOTHING
#define BUTTON_MULTI_23 CMD_NOTHING
#define BUTTON_MULTI_24 CMD_NOTHING
#define BUTTON_MULTI_25 CMD_NOTHING
#define BUTTON_MULTI_34 CMD_NOTHING
#define BUTTON_MULTI_35 CMD_NOTHING
#define BUTTON_MULTI_45 CMD_NOTHING
//#################### Various settings ##############################
// Loglevels available (don't change!)
#define LOGLEVEL_ERROR 1 // only errors
#define LOGLEVEL_NOTICE 2 // errors + important messages
#define LOGLEVEL_INFO 3 // infos + errors + important messages
#define LOGLEVEL_DEBUG 4 // almost everything
// Serial-logging-configuration
const uint8_t serialDebug = LOGLEVEL_DEBUG; // Current loglevel for serial console
// Static ip-configuration
#ifdef STATIC_IP_ENABLE
*/
// *****BUTTON***** *****ACTION*****
#define BUTTON_0_SHORT CMD_NEXTTRACK
#define BUTTON_1_SHORT CMD_PREVTRACK
#define BUTTON_2_SHORT CMD_PLAYPAUSE
#define BUTTON_3_SHORT CMD_MEASUREBATTERY
#define BUTTON_4_SHORT CMD_NOTHING
#define BUTTON_5_SHORT CMD_NOTHING
#define BUTTON_0_LONG CMD_LASTTRACK
#define BUTTON_1_LONG CMD_FIRSTTRACK
#define BUTTON_2_LONG CMD_PLAYPAUSE
#define BUTTON_3_LONG CMD_SLEEPMODE
#define BUTTON_4_LONG CMD_NOTHING
#define BUTTON_5_LONG CMD_NOTHING
#define BUTTON_MULTI_01 TOGGLE_WIFI_STATUS
#define BUTTON_MULTI_02 ENABLE_FTP_SERVER
#define BUTTON_MULTI_03 CMD_NOTHING
#define BUTTON_MULTI_04 CMD_NOTHING
#define BUTTON_MULTI_05 CMD_NOTHING
#define BUTTON_MULTI_12 CMD_NOTHING
#define BUTTON_MULTI_13 CMD_NOTHING
#define BUTTON_MULTI_14 CMD_NOTHING
#define BUTTON_MULTI_15 CMD_NOTHING
#define BUTTON_MULTI_23 CMD_NOTHING
#define BUTTON_MULTI_24 CMD_NOTHING
#define BUTTON_MULTI_25 CMD_NOTHING
#define BUTTON_MULTI_34 CMD_NOTHING
#define BUTTON_MULTI_35 CMD_NOTHING
#define BUTTON_MULTI_45 CMD_NOTHING
//#################### Various settings ##############################
// Loglevels available (don't change!)
#define LOGLEVEL_ERROR 1 // only errors
#define LOGLEVEL_NOTICE 2 // errors + important messages
#define LOGLEVEL_INFO 3 // infos + errors + important messages
#define LOGLEVEL_DEBUG 4 // almost everything
// Serial-logging-configuration
const uint8_t serialDebug = LOGLEVEL_DEBUG; // Current loglevel for serial console
// Static ip-configuration
#ifdef STATIC_IP_ENABLE
IPAddress local_IP(192, 168, 2, 100); // ESPuino's IP IPAddress local_IP(192, 168, 2, 100); // ESPuino's IP
IPAddress gateway(192, 168, 2, 1); // IP of the gateway/router IPAddress gateway(192, 168, 2, 1); // IP of the gateway/router
IPAddress subnet(255, 255, 255, 0); // Netmask of your network (/24 => 255.255.255.0) IPAddress subnet(255, 255, 255, 0); // Netmask of your network (/24 => 255.255.255.0)
IPAddress primaryDNS(192, 168, 2, 1); // DNS-server of your network; in private networks it's usually the gatewy's IP IPAddress primaryDNS(192, 168, 2, 1); // DNS-server of your network; in private networks it's usually the gatewy's IP
#endif
#endif
// Buttons (better leave unchanged if in doubts :-))
uint8_t buttonDebounceInterval = 50; // Interval in ms to software-debounce buttons
uint16_t intervalToLongPress = 700; // Interval in ms to distinguish between short and long press of previous/next-button
// Buttons (better leave unchanged if in doubts :-))
uint8_t buttonDebounceInterval = 50; // Interval in ms to software-debounce buttons
uint16_t intervalToLongPress = 700; // Interval in ms to distinguish between short and long press of previous/next-button
// RFID
#define RFID_SCAN_INTERVAL 300 // Interval-time in ms (how often is RFID read?)
// RFID
#define RFID_SCAN_INTERVAL 300 // Interval-time in ms (how often is RFID read?)
// Automatic restart
#ifdef SHUTDOWN_IF_SD_BOOT_FAILS
// Automatic restart
#ifdef SHUTDOWN_IF_SD_BOOT_FAILS
uint32_t deepsleepTimeAfterBootFails = 20; // Automatic restart takes place if boot was not successful after this period (in seconds) uint32_t deepsleepTimeAfterBootFails = 20; // Automatic restart takes place if boot was not successful after this period (in seconds)
#endif
#endif
// FTP
// Nothing to be configured here...
// Default user/password is esp32/esp32 but can be changed via webgui
// FTP
// Nothing to be configured here...
// Default user/password is esp32/esp32 but can be changed via webgui
// ESPuino will create a WiFi if joing existing WiFi was not possible. Name can be configured here.
static const char accessPointNetworkSSID[] PROGMEM = "ESPuino"; // Access-point's SSID
static const char nameBluetoothDevice[] PROGMEM = "ESPuino"; // Name of your ESPuino as Bluetooth-device
// ESPuino will create a WiFi if joing existing WiFi was not possible. Name can be configured here.
static const char accessPointNetworkSSID[] PROGMEM = "ESPuino"; // Access-point's SSID
static const char nameBluetoothDevice[] PROGMEM = "ESPuino"; // Name of your ESPuino as Bluetooth-device
// Where to store the backup-file for NVS-records
static const char backupFile[] PROGMEM = "/backup.txt"; // File is written every time a (new) RFID-assignment via GUI is done
// Where to store the backup-file for NVS-records
static const char backupFile[] PROGMEM = "/backup.txt"; // File is written every time a (new) RFID-assignment via GUI is done
//#################### Settings for optional Modules##############################
// (optinal) Neopixel
#ifdef NEOPIXEL_ENABLE
//#################### Settings for optional Modules##############################
// (optinal) Neopixel
#ifdef NEOPIXEL_ENABLE
#define NUM_LEDS 24 // number of LEDs #define NUM_LEDS 24 // number of LEDs
#define CHIPSET WS2812B // type of Neopixel #define CHIPSET WS2812B // type of Neopixel
#define COLOR_ORDER GRB #define COLOR_ORDER GRB
#endif
#endif
// (optional) Default-voltages for battery-monitoring via Neopixel
float warningLowVoltage = 3.4; // If battery-voltage is >= this value, a cyclic warning will be indicated by Neopixel (can be changed via GUI!)
uint8_t voltageCheckInterval = 10; // How of battery-voltage is measured (in minutes) (can be changed via GUI!)
float voltageIndicatorLow = 3.0; // Lower range for Neopixel-voltage-indication (0 leds) (can be changed via GUI!)
float voltageIndicatorHigh = 4.2; // Upper range for Neopixel-voltage-indication (all leds) (can be changed via GUI!)
// (optional) Default-voltages for battery-monitoring via Neopixel
float warningLowVoltage = 3.4; // If battery-voltage is >= this value, a cyclic warning will be indicated by Neopixel (can be changed via GUI!)
uint8_t voltageCheckInterval = 10; // How of battery-voltage is measured (in minutes) (can be changed via GUI!)
float voltageIndicatorLow = 3.0; // Lower range for Neopixel-voltage-indication (0 leds) (can be changed via GUI!)
float voltageIndicatorHigh = 4.2; // Upper range for Neopixel-voltage-indication (all leds) (can be changed via GUI!)
// (optinal) Headphone-detection (leave unchanged if in doubts...)
#ifdef HEADPHONE_ADJUST_ENABLE
// (optinal) Headphone-detection (leave unchanged if in doubts...)
#ifdef HEADPHONE_ADJUST_ENABLE
uint16_t headphoneLastDetectionDebounce = 1000; // Debounce-interval in ms when plugging in headphone uint16_t headphoneLastDetectionDebounce = 1000; // Debounce-interval in ms when plugging in headphone
#endif
#endif
// (optional) Topics for MQTT
#ifdef MQTT_ENABLE
// (optional) Topics for MQTT
#ifdef MQTT_ENABLE
uint16_t mqttRetryInterval = 60; // Try to reconnect to MQTT-server every (n) seconds if connection is broken uint16_t mqttRetryInterval = 60; // Try to reconnect to MQTT-server every (n) seconds if connection is broken
uint8_t mqttMaxRetriesPerInterval = 1; // Number of retries per time-interval (mqttRetryInterval). mqttRetryInterval 60 / mqttMaxRetriesPerInterval 1 => once every 60s uint8_t mqttMaxRetriesPerInterval = 1; // Number of retries per time-interval (mqttRetryInterval). mqttRetryInterval 60 / mqttMaxRetriesPerInterval 1 => once every 60s
#define DEVICE_HOSTNAME "ESP32-ESPuino" // Name that is used for MQTT #define DEVICE_HOSTNAME "ESP32-ESPuino" // Name that is used for MQTT
@ -200,4 +202,5 @@ float voltageIndicatorHigh = 4.2; // Upper range for Neopixel-
#ifdef MEASURE_BATTERY_VOLTAGE #ifdef MEASURE_BATTERY_VOLTAGE
static const char topicBatteryVoltage[] PROGMEM = "State/ESPuino/Voltage"; static const char topicBatteryVoltage[] PROGMEM = "State/ESPuino/Voltage";
#endif #endif
#endif
#endif #endif
Write Preview
Loading…
Cancel
Save