Tiny calculation fix / bringing .de back as default-log-language

src/RfidPn5180.cpp

@@ -87,7 +87,7 @@ extern unsigned long Rfid_LastRfidCheckTimestamp;
                 // Reset to dummy-value if no card is there
                 // Necessary to differentiate between "card is still applied" and "card is re-applied again after removal"
                 // lastTimeDetected14443 is used to prevent "new card detection with old card" with single events where no card was detected
-                if (!lastTimeDetected14443 || (lastTimeDetected14443 - millis() >= 300)) {
+                if (!lastTimeDetected14443 || (millis() - lastTimeDetected14443 >= 300)) {
                     lastTimeDetected14443 = 0;
                     for (uint8_t i=0; i<cardIdSize; i++) {
                         lastCardId[i] = 0;
@@ -118,7 +118,7 @@ extern unsigned long Rfid_LastRfidCheckTimestamp;
                 lastTimeDetected15693 = millis();
             } else {
                 // lastTimeDetected15693 is used to prevent "new card detection with old card" with single events where no card was detected
-                if (!lastTimeDetected15693 || (lastTimeDetected15693 - millis() >= 300)) {
+                if (!lastTimeDetected15693 || (millis() - lastTimeDetected15693 >= 300)) {
                     lastTimeDetected15693 = 0;
                     for (uint8_t i=0; i<cardIdSize; i++) {
                         lastCardId[i] = 0;

src/settings.h

@@ -30,7 +30,7 @@
     #define FTP_ENABLE                      // Enables FTP-server; DON'T FORGET TO ACTIVATE AFTER BOOT BY PRESSING PAUSE + NEXT-BUTTONS (IN PARALLEL)!
     #define NEOPIXEL_ENABLE                 // Don't forget configuration of NUM_LEDS if enabled
     //#define NEOPIXEL_REVERSE_ROTATION     // Some Neopixels are adressed/soldered counter-clockwise. This can be configured here.
-    #define LANGUAGE EN                     // DE = deutsch; EN = english
+    #define LANGUAGE DE                     // DE = deutsch; EN = english
     //#define STATIC_IP_ENABLE              // Enables static IP-configuration (change static ip-section accordingly)
     //#define HEADPHONE_ADJUST_ENABLE       // Used to adjust (lower) volume for optional headphone-pcb (refer maxVolumeSpeaker / maxVolumeHeadphone) and to enable stereo (if PLAY_MONO_SPEAKER is set)
     #define PLAY_MONO_SPEAKER               // If only one speaker is used enabling mono should make sense. Please note: headphones is always stereo (if HEADPHONE_ADJUST_ENABLE is active)