phschoen
/
ESPuino
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

add breakout carrier board as an additional build target

master
Schoenberger, Philipp 4 years ago
committed by Schoenberger, Philipp
parent
1acfdcd578
commit
d7ded9cbbf
4 changed files with 148 additions and 1 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Unified View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 11
      platformio.ini
  2. 134
      src/settings-breakout_carrier.h
  3. 2
      src/settings-lolin_d32.h
  4. 2
      src/settings.h

11
platformio.ini
View File

@ -70,6 +70,17 @@ build_flags = -DHAL=3
upload_port = /dev/cu.wchusbserial1410 upload_port = /dev/cu.wchusbserial1410
monitor_port = /dev/cu.wchusbserial1410 monitor_port = /dev/cu.wchusbserial1410
[env:lolin_d32_breakout_carrier]
;https://docs.platformio.org/en/latest/boards/espressif32/lolin_d32.html
board = lolin_d32
;board_build.partitions = huge_app.csv
board_build.partitions = custom_4mb_noota.csv
build_flags = -DHAL=42
extra_scripts = pre:extrascript.py
;upload_port = /dev/cu.wchusbserial1410
;monitor_port = /dev/cu.wchusbserial1410
[env:lolin_d32_pro] [env:lolin_d32_pro]
;https://docs.platformio.org/en/latest/boards/espressif32/lolin_d32_pro.html ;https://docs.platformio.org/en/latest/boards/espressif32/lolin_d32_pro.html
board = lolin_d32_pro board = lolin_d32_pro

134
src/settings-breakout_carrier.h
View File

@ -0,0 +1,134 @@
#ifndef __ESPUINO_SETTINGS_BREAKOUT_CARRIER_H__
#define __ESPUINO_SETTINGS_BREAKOUT_CARRIER_H__
#include <Arduino.h>
//######################### INFOS ####################################
/* This is a develboard-specific config-file for *Wemos Lolin D32*. Specific doesn't mean it's only working with this board.
Lolin D32 is the successor of Lolin32 and the "little brother" of Wemos Lolin D32 pro.
PCB: https://github.com/biologist79/ESPuino/tree/master/PCBs/ESP32_Breakout_Carrier
Infos: https://www.wemos.cc/en/latest/d32/d32.html
Schematics: https://www.wemos.cc/en/latest/_static/files/sch_d32_v1.0.0.pdf
Caveats: GPIO35 (battery monitoring) can't be changed, it's built in
Status:
tested with 2x SPI: RC522 & SD (by biologist79)
*/
//################## GPIO-configuration ##############################
// Please note: GPIOs 34, 35, 36, 39 are input-only and don't have pullup-resistors.
// So if connecting a button to these, make sure to add a 10k-pullup-resistor for each button.
// Further infos: https://randomnerdtutorials.com/esp32-pinout-reference-gpios/
#ifdef SD_MMC_1BIT_MODE
// uSD-card-reader (via SD-MMC 1Bit)
//
// SD_MMC uses fixed pins
// MOSI 15
// SCK 14
// MISO 2
#else
// uSD-card-reader (via SPI)
#define SPISD_CS 15 // GPIO for chip select (SD)
#ifndef SINGLE_SPI_ENABLE
#define SPISD_MOSI 13 // GPIO for master out slave in (SD) => not necessary for single-SPI
#define SPISD_MISO 16 // GPIO for master in slave ou (SD) => not necessary for single-SPI
#define SPISD_SCK 14 // GPIO for clock-signal (SD) => not necessary for single-SPI
#endif
#endif
// RFID (via SPI)
#define RST_PIN 99 // Not necessary but has to be set anyway; so let's use a dummy-number
#define RFID_CS 21 // GPIO for chip select (RFID)
#define RFID_MOSI 24 // GPIO for master out slave in (RFID)
#define RFID_MISO 19 // GPIO for master in slave out (RFID)
#define RFID_SCK 18 // GPIO for clock-signal (RFID)
#ifdef RFID_READER_TYPE_PN5180
#define RFID_BUSY 16 // PN5180 BUSY PIN
#define RFID_RST 22 // PN5180 RESET PIN
#define RFID_IRQ 39 // PN5180 IRQ PIN (only needed for low power card detection)
#endif
// I2S (DAC)
#define I2S_DOUT 25 // Digital out (I2S)
#define I2S_BCLK 27 // BCLK (I2S)
#define I2S_LRC 26 // LRC (I2S)
// Rotary encoder
#ifdef USEROTARY_ENABLE
#define ROTARYENCODER_CLK 34 // If you want to reverse encoder's direction, just switch GPIOs of CLK with DT (in software or hardware)
#define ROTARYENCODER_DT 35 // Info: Lolin D32 is using 35 for battery-voltage-monitoring!
#define ROTARYENCODER_BUTTON 32 // (set to 99 to disable; 0->39 for GPIO; 100->115 for port-expander)
#endif
// Control-buttons (set to 99 to DISABLE; 0->39 for GPIO; 100->115 for port-expander)
//#define GPIO_PA_EN 112 // To enable amp for loudspeaker (GPIO or port-channel)
//#define GPIO_HP_EN 113 // To enable amp for headphones (GPIO or port-channel)
// Control-buttons (set to 99 to DISABLE; 0->39 for GPIO; 100->115 for port-expander)
#define NEXT_BUTTON 5 // Button 0: GPIO to detect next
#define PREVIOUS_BUTTON 33 // Button 1: GPIO to detect previous (Important: as of 19.11.2020 changed from 33 to 2; make sure to change in SD-MMC-mode)
#define PAUSEPLAY_BUTTON 4 // Button 2: GPIO to detect pause/play
#define BUTTON_4 99 // Button 4: unnamed optional button
#define BUTTON_5 99 // Button 5: unnamed optional button
// Channels of port-expander can be read cyclic or interrupt-driven. It's strongly recommended to use the interrupt-way!
// Infos: https://forum.espuino.de/t/einsatz-des-port-expanders-pca9555/306
#ifdef PORT_EXPANDER_ENABLE
#define PE_INTERRUPT_PIN 99 // GPIO that is used to receive interrupts from port-expander
#endif
// I2C-configuration (necessary for RC522 [only via i2c - not spi!] or port-expander)
#if defined(RFID_READER_TYPE_MFRC522_I2C) || defined(PORT_EXPANDER_ENABLE) || defined(MPU6050_ENABLE)
#define ext_IIC_CLK 18 // i2c-SCL (clock)
#define ext_IIC_DATA 21 // i2c-SDA (data)
#endif
// Wake-up button => this also is the interrupt-pin if port-expander is enabled!
// Please note: only RTC-GPIOs (0, 4, 12, 13, 14, 15, 25, 26, 27, 32, 33, 34, 35, 36, 39, 99) can be used! Set to 99 to DISABLE.
// Please note #2: this button can be used as interrupt-pin for port-expander. If so, all pins connected to port-expander can wake up ESPuino.
#define WAKEUP_BUTTON PREVIOUS_BUTTON// Defines the button that is used to wake up ESPuino from deepsleep.
// (optional) Power-control
#define POWER 17 // GPIO used to drive transistor-circuit, that switches off peripheral devices while ESP32-deepsleep
// (optional) Neopixel
#define LED_PIN 12 // GPIO for Neopixel-signaling
// (optinal) Headphone-detection
#ifdef HEADPHONE_ADJUST_ENABLE
//#define DETECT_HP_ON_HIGH // Per default headphones are supposed to be connected if HT_DETECT is LOW. DETECT_HP_ON_HIGH will change this behaviour to HIGH.
#define HP_DETECT 22 // GPIO that detects, if there's a plug in the headphone jack or not
#endif
// (optional) Monitoring of battery-voltage via ADC
#ifdef MEASURE_BATTERY_VOLTAGE
#define VOLTAGE_READ_PIN 36 // Cannot be changed, it's built in
constexpr float referenceVoltage = 3.30; // Voltage between 3.3V and GND-pin at the develboard in battery-mode (disconnect USB!)
constexpr float offsetVoltage = 0.2; // If voltage measured by ESP isn't 100% accurate, you can add an correction-value here
#endif
#ifdef MEASURE_BATTERY_VOLTAGE
constexpr uint16_t rdiv1 = 100; // Cannot be changed, it's built in
constexpr uint16_t rdiv2 = 100; // Cannot be changed, it's built in
#endif
// (Optional) remote control via infrared
#ifdef IR_CONTROL_ENABLE
#define IRLED_PIN 22 // GPIO where IR-receiver is connected (only tested with VS1838B)
#define IR_DEBOUNCE 200 // Interval in ms to wait at least for next signal (not used for actions volume up/down)
// Actions available. Use your own remote control and have a look at the console for "Command=0x??". E.g. "Protocol=NEC Address=0x17F Command=0x68 Repeat gap=39750us"
// Make sure to define a hex-code not more than once as this will lead to a compile-error
// https://forum.espuino.de/t/neues-feature-fernsteuerung-per-infrarot-fernbedienung/265
#define RC_PLAY 0x68 // command for play
#define RC_PAUSE 0x67 // command for pause
#define RC_NEXT 0x6b // command for next track of playlist
#define RC_PREVIOUS 0x6a // command for previous track of playlist
#define RC_FIRST 0x6c // command for first track of playlist
#define RC_LAST 0x6d // command for last track of playlist
#define RC_VOL_UP 0x1a // Command for volume up (one step)
#define RC_VOL_DOWN 0x1b // Command for volume down (one step)
#define RC_MUTE 0x1c // Command to mute ESPuino
#define RC_SHUTDOWN 0x2a // Command for deepsleep
#define RC_BLUETOOTH 0x72 // Command to enable/disable bluetooth
#define RC_FTP 0x65 // Command to enable FTP-server
#endif
#endif

2
src/settings-lolin_d32.h
View File

@ -1,6 +1,6 @@
#ifndef __ESPUINO_SETTINGS_LOLIN_D32_H__ #ifndef __ESPUINO_SETTINGS_LOLIN_D32_H__
#define __ESPUINO_SETTINGS_LOLIN_D32_H__ #define __ESPUINO_SETTINGS_LOLIN_D32_H__
#include "Arduino.h"
#include <Arduino.h>
//######################### INFOS #################################### //######################### INFOS ####################################
/* This is a develboard-specific config-file for *Wemos Lolin D32*. Specific doesn't mean it's only working with this board. /* This is a develboard-specific config-file for *Wemos Lolin D32*. Specific doesn't mean it's only working with this board.

2
src/settings.h
View File

@ -242,6 +242,8 @@
#include "settings-lolin_d32_pro_sdmmc_pe.h" // Pre-configured settings for ESPuino Lolin D32 pro with SDMMC + port-expander (https://forum.espuino.de/t/lolin-d32-pro-mit-sd-mmc-pn5180-max-fuenf-buttons-und-port-expander-smd/638) #include "settings-lolin_d32_pro_sdmmc_pe.h" // Pre-configured settings for ESPuino Lolin D32 pro with SDMMC + port-expander (https://forum.espuino.de/t/lolin-d32-pro-mit-sd-mmc-pn5180-max-fuenf-buttons-und-port-expander-smd/638)
#elif (HAL == 8) #elif (HAL == 8)
#include "settings-azdelivery_sdmmc.h" // Pre-configured settings for AZ Delivery ESP32 NodeMCU / Devkit C (https://forum.espuino.de/t/az-delivery-esp32-nodemcu-devkit-c-mit-sd-mmc-und-pn5180-als-rfid-leser/634) #include "settings-azdelivery_sdmmc.h" // Pre-configured settings for AZ Delivery ESP32 NodeMCU / Devkit C (https://forum.espuino.de/t/az-delivery-esp32-nodemcu-devkit-c-mit-sd-mmc-und-pn5180-als-rfid-leser/634)
#elif (HAL == 42)
#include "settings-breakout_carrier.h" // Pre-configured settings for AZ Delivery ESP32 NodeMCU / Devkit C (https://forum.espuino.de/t/az-delivery-esp32-nodemcu-devkit-c-mit-sd-mmc-und-pn5180-als-rfid-leser/634)
#elif (HAL == 99) #elif (HAL == 99)
#include "settings-custom.h" // Contains all user-relevant settings custom-board #include "settings-custom.h" // Contains all user-relevant settings custom-board
#endif #endif

Write Preview
Loading…
Cancel
Save