phschoen
/
ESPuino
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Adapting board-specific layout but RFID with 2 SPIs not yet really working...

master
Torsten Stauder 5 years ago
parent
29adb2fd3e
commit
fa3b8fe0fc
6 changed files with 164 additions and 32 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 31
      platformio.ini
  2. 14
      src/main.cpp
  3. 15
      src/settings-espa1s.h
  4. 14
      src/settings-lolin32.h
  5. 76
      src/settings-lolin_d32.h
  6. 40
      src/settings.h

31
platformio.ini
View File

@ -24,7 +24,7 @@ lib_deps_external =
; https://github.com/pschatzmann/ESP32-A2DP.git
[env:common]
build_flags = -DHAL=1
build_flags = -DHAL=1 -DHAL=3
; Don't forget to run this script if you changed the html-files provided in any way
extra_scripts =
pre:processHtml.py
@ -54,6 +54,7 @@ lib_deps =
${common.lib_deps_external}
https://github.com/biologist79/rfid.git
https://github.com/tueddy/PN5180-Library.git
extra_scripts = ${env:common.extra_scripts}
upload_port = /dev/cu.SLAB_USBtoUART
monitor_port = /dev/cu.SLAB_USBtoUART
@ -63,7 +64,11 @@ board = lolin_d32
framework = arduino
monitor_speed = 115200
board_build.partitions = no_ota.csv
lib_deps = ${env:common.lib_deps}
lib_deps =
${common.lib_deps_builtin}
${common.lib_deps_external}
https://github.com/biologist79/rfid.git
https://github.com/tueddy/PN5180-Library.git
extra_scripts = ${env:common.extra_scripts}
upload_port = /dev/cu.SLAB_USBtoUART
monitor_port = /dev/cu.SLAB_USBtoUART
@ -74,10 +79,14 @@ board = lolin_d32_pro
framework = arduino
monitor_speed = 115200
board_build.partitions = no_ota.csv
lib_deps = ${env:common.lib_deps}
lib_deps =
${common.lib_deps_builtin}
${common.lib_deps_external}
https://github.com/biologist79/rfid.git
https://github.com/tueddy/PN5180-Library.git
extra_scripts = ${env:common.extra_scripts}
upload_port = COM6
monitor_port = COM6
upload_port = /dev/cu.SLAB_USBtoUART
monitor_port = /dev/cu.SLAB_USBtoUART
[env:nodemcu-32s]
platform = espressif32
@ -85,7 +94,11 @@ board = nodemcu-32s
framework = arduino
monitor_speed = 115200
board_build.partitions = no_ota.csv
lib_deps = ${env:common.lib_deps}
lib_deps =
${common.lib_deps_builtin}
${common.lib_deps_external}
https://github.com/biologist79/rfid.git
https://github.com/tueddy/PN5180-Library.git
extra_scripts = ${env:common.extra_scripts}
upload_port = /dev/cu.SLAB_USBtoUART
monitor_port = /dev/cu.SLAB_USBtoUART
@ -96,7 +109,11 @@ board = az-delivery-devkit-v4
framework = arduino
monitor_speed = 115200
board_build.partitions = no_ota.csv
lib_deps = ${env:common.lib_deps}
lib_deps =
${common.lib_deps_builtin}
${common.lib_deps_external}
https://github.com/biologist79/rfid.git
https://github.com/tueddy/PN5180-Library.git
extra_scripts = ${env:common.extra_scripts}
upload_port = /dev/cu.SLAB_USBtoUART
monitor_port = /dev/cu.SLAB_USBtoUART

14
src/main.cpp
View File

@ -1,12 +1,14 @@
// !!! MAKE SURE TO EDIT settings.h !!!
#include "settings.h" // Contains all user-relevant settings
#include "settings.h" // Contains all user-relevant settings (general)
// !!! MAKE SURE TO EDIT PLATFORM SPECIFIC settings-****.h !!!
#if (HAL == 1)
#include "settings-lolin32.h" // Contains all user-relevant settings
#include "settings-lolin32.h" // Contains all user-relevant settings for Wemos Lolin32
#elif (HAL == 2)
#include "settings-espa1s.h" // Contains all user-relevant settings
#include "settings-espa1s.h" // Contains all user-relevant settings for ESP32-A1S Audiokit
#elif (HAL == 3)
#include "settings-lolin_D32.h" // Contains all user-relevant settings for Wemos Lolin D32
#endif
#include <ESP32Encoder.h>
@ -3760,17 +3762,17 @@ void setup() {
i2cBusOne.begin(IIC_DATA, IIC_CLK, 40000);
while (not ac.begin()) {
Serial.printf("AC101 Failed!\n");
Serial.println(F("AC101 Failed!"));
delay(1000);
}
Serial.printf("AC101 via I2C - OK!\n");
Serial.println(F("AC101 via I2C - OK!"));
pinMode(22, OUTPUT);
digitalWrite(22, HIGH);
pinMode(GPIO_PA_EN, OUTPUT);
digitalWrite(GPIO_PA_EN, HIGH);
Serial.printf("Built-In Amplifier enabled\n");
Serial.println(F("Built-in amplifier enabled\n"));
#endif
#ifndef SINGLE_SPI_ENABLE

15
src/settings-espa1s.h
View File

@ -1,5 +1,15 @@
#include "Arduino.h"
//######################### INFOS ####################################
/* This is a develboard-specific config-file for *AI Tinker ESP32-A1S-AudioKit*. It's highly customized and almost certainly
not suitable for a different develboards.
Has a lot of stuff already onboard but needs some soldering rework as there are not all GPIOs exposed
PCB: Not necessary.
Infos: https://github.com/Ai-Thinker-Open/ESP32-A1S-AudioKit
Status: tested by kkloesner
*/
//################## GPIO-configuration ##############################
// uSD-card-reader (via SPI)
#define SPISD_CS 13 // GPIO for chip select (SD)
@ -53,3 +63,8 @@
#define VOLTAGE_READ_PIN 33 // GPIO used to monitor battery-voltage. Change to 35 if you're using Lolin D32 or Lolin D32 pro as it's hard-wired there!
#endif
// (optional) For measuring battery-voltage a voltage-divider is necessary. Their values need to be configured here.
#ifdef MEASURE_BATTERY_VOLTAGE
uint8_t rdiv1 = 129; // Rdiv1 of voltage-divider (kOhms) (measure exact value with multimeter!)
uint16_t rdiv2 = 389; // Rdiv2 of voltage-divider (kOhms) (measure exact value with multimeter!) => used to measure voltage via ADC!
#endif

14
src/settings-lolin32.h
View File

@ -1,5 +1,13 @@
#include "Arduino.h"
//######################### INFOS ####################################
/* This is a develboard-specific config-file for *Wemos Lolin32*. Specific doesn't mean it's only working with this board.
Lolin32 is the predecessor of Lolin D32.
PCB: https://github.com/biologist79/Tonuino-ESP32-I2S/tree/master/PCBs/Wemos%20Lolin32
Infos: https://arduino-projekte.info/wemos-lolin32/
Status: tested (by biologist79)
*/
//################## GPIO-configuration ##############################
#ifdef SD_MMC_1BIT_MODE
// uSD-card-reader (via SD-MMC 1Bit)
@ -59,3 +67,9 @@
#ifdef MEASURE_BATTERY_VOLTAGE
#define VOLTAGE_READ_PIN 33 // GPIO used to monitor battery-voltage. Change to 35 if you're using Lolin D32 or Lolin D32 pro as it's hard-wired there!
#endif
// (optional) For measuring battery-voltage a voltage-divider is necessary. Their values need to be configured here.
#ifdef MEASURE_BATTERY_VOLTAGE
uint8_t rdiv1 = 129; // Rdiv1 of voltage-divider (kOhms) (measure exact value with multimeter!)
uint16_t rdiv2 = 389; // Rdiv2 of voltage-divider (kOhms) (measure exact value with multimeter!) => used to measure voltage via ADC!
#endif

76
src/settings-lolin_d32.h
View File

@ -0,0 +1,76 @@
#include "Arduino.h"
//######################### INFOS ####################################
/* This is a develboard-specific config-file for *Wemos Lolin D32*. Specific doesn't mean it's only working with this board.
Lolin D32 is the successor of Lolin32 and the "little brother" of Wemos Lolin D32 pro.
PCB: https://github.com/biologist79/Tonuino-ESP32-I2S/tree/master/PCBs/Wemos%20Lolin%20D32
Infos: https://www.wemos.cc/en/latest/d32/d32.html
Status: untested
*/
//################## GPIO-configuration ##############################
#ifdef SD_MMC_1BIT_MODE
// uSD-card-reader (via SD-MMC 1Bit)
//
// SD_MMC uses fixed pins
// MOSI 15
// SCKK 14
// MISO 2 // hardware pullup may required
#else
// uSD-card-reader (via SPI)
#define SPISD_CS 15 // GPIO for chip select (SD)
#ifndef SINGLE_SPI_ENABLE
#define SPISD_MOSI 13 // GPIO for master out slave in (SD) => not necessary for single-SPI
#define SPISD_MISO 16 // GPIO for master in slave ou (SD) => not necessary for single-SPI
#define SPISD_SCK 14 // GPIO for clock-signal (SD) => not necessary for single-SPI
#endif
#endif
// RFID (via SPI)
#define RST_PIN 99 // Not necessary but has to be set anyway; so let's use a dummy-number
#define RFID_CS 21 // GPIO for chip select (RFID)
#define RFID_MOSI 23 // GPIO for master out slave in (RFID)
#define RFID_MISO 19 // GPIO for master in slave out (RFID)
#define RFID_SCK 18 // GPIO for clock-signal (RFID)
#ifdef RFID_READER_TYPE_PN5180
#define RFID_BUSY 16 // PN5180 BUSY PIN
#define RFID_RST 22 // PN5180 RESET PIN
#endif
// I2S (DAC)
#define I2S_DOUT 25 // Digital out (I2S)
#define I2S_BCLK 27 // BCLK (I2S)
#define I2S_LRC 26 // LRC (I2S)
// Rotary encoder
#define DREHENCODER_CLK 34 // If you want to reverse encoder's direction, just switch GPIOs of CLK with DT (in software or hardware)
#define DREHENCODER_DT 35 // Info: Lolin D32 / Lolin D32 pro 35 are using 35 for battery-voltage-monitoring!
#define DREHENCODER_BUTTON 32 // Button is used to switch Tonuino on and off
// Control-buttons
#define PAUSEPLAY_BUTTON 5 // GPIO to detect pause/play
#define NEXT_BUTTON 4 // GPIO to detect next
#define PREVIOUS_BUTTON 2 // GPIO to detect previous (Important: as of 19.11.2020 changed from 33 to 2)
// (optional) Power-control
#define POWER 17 // GPIO used to drive transistor-circuit, that switches off peripheral devices while ESP32-deepsleep
// (optional) Neopixel
#define LED_PIN 12 // GPIO for Neopixel-signaling
// (optinal) Headphone-detection
#ifdef HEADPHONE_ADJUST_ENABLE
#define HP_DETECT 22 // GPIO that detects, if there's a plug in the headphone jack or not
#endif
// (optional) Monitoring of battery-voltage via ADC
#ifdef MEASURE_BATTERY_VOLTAGE
#define VOLTAGE_READ_PIN 35 // GPIO used to monitor battery-voltage. Change to 35 if you're using Lolin D32 or Lolin D32 pro as it's hard-wired there!
#endif
// (optional) For measuring battery-voltage. No need to change here, it's built in
#ifdef MEASURE_BATTERY_VOLTAGE
uint8_t rdiv1 = 100;
uint16_t rdiv2 = 100;
#endif

40
src/settings.h
View File

@ -1,31 +1,44 @@
#include "Arduino.h"
//######################### INFOS ####################################
// This is the general configfile for Tonuino-configuration.
//################## HARDWARE-PLATFORM ###############################
/* Make sure to also edit the configfile, that is specific for your platform.
If in doubts (your develboard is not listed) use HAL 1
1: Wemos Lolin32 => settings-lolin32.h
2: ESP32-A1S Audiokit => settings-espa1s.h
3: Wemos Lolin D32 => settings-lolin_D32.h
more to come...
*/
#define HAL 1 // HAL 1 = LoLin32, 2 = AI AudioKit, 3 = Lolin D32
//########################## MODULES #################################
//#define MDNS_ENABLE // When enabled, you don't have to handle with Tonuino's IP-address. If hostname is set to "tonuino", you can reach it via tonuino.local
//#define MQTT_ENABLE // Make sure to configure mqtt-server and (optionally) username+pwd
//#define FTP_ENABLE // Enables FTP-server; DON'T FORGET TO ACTIVATE AFTER BOOT BY PRESSING PAUSE + NEXT-BUTTONS (IN PARALLEL)!
//#define NEOPIXEL_ENABLE // Don't forget configuration of NUM_LEDS if enabled
#define MDNS_ENABLE // When enabled, you don't have to handle with Tonuino's IP-address. If hostname is set to "tonuino", you can reach it via tonuino.local
#define MQTT_ENABLE // Make sure to configure mqtt-server and (optionally) username+pwd
#define FTP_ENABLE // Enables FTP-server; DON'T FORGET TO ACTIVATE AFTER BOOT BY PRESSING PAUSE + NEXT-BUTTONS (IN PARALLEL)!
#define NEOPIXEL_ENABLE // Don't forget configuration of NUM_LEDS if enabled
#define NEOPIXEL_REVERSE_ROTATION // Some Neopixels are adressed/soldered counter-clockwise. This can be configured here.
#define LANGUAGE 1 // 1 = deutsch; 2 = english
//#define HEADPHONE_ADJUST_ENABLE // Used to adjust (lower) volume for optional headphone-pcb (refer maxVolumeSpeaker / maxVolumeHeadphone)
#define SHUTDOWN_IF_SD_BOOT_FAILS // Will put ESP to deepsleep if boot fails due to SD. Really recommend this if there's in battery-mode no other way to restart ESP! Interval adjustable via deepsleepTimeAfterBootFails.
//#define MEASURE_BATTERY_VOLTAGE // Enables battery-measurement via GPIO (ADC) and voltage-divider
#define MEASURE_BATTERY_VOLTAGE // Enables battery-measurement via GPIO (ADC) and voltage-divider
//#define PLAY_LAST_RFID_AFTER_REBOOT // When restarting Tonuino, the last RFID that was active before, is recalled and played
//#define BLUETOOTH_ENABLE // Doesn't work currently (so don't enable) as there's not enough DRAM available
//################## select SD card mode #############################
//#define SD_MMC_1BIT_MODE // run SD card in SD-MMC 1Bit mode
//#define SINGLE_SPI_ENABLE // If only one SPI-instance should be used instead of two (not yet working!) (Works on ESP32-A1S with RFID via I2C)
//################## select RFID reader ##############################
//#define RFID_READER_TYPE_MFRC522_SPI // use MFRC522 via SPI
#define RFID_READER_TYPE_MFRC522_I2C // use MFRC522 via I2C
#define RFID_READER_TYPE_MFRC522_SPI // use MFRC522 via SPI
//#define RFID_READER_TYPE_MFRC522_I2C // use MFRC522 via I2C
//#define RFID_READER_TYPE_PN5180
//################## select Hardware Platform ##############################
// #define HAL 2 // HAL 1 = LoLin32, 2 = AI AudioKit - no need to define when using platformIO BuildProcess
//#################### Various settings ##############################
// Loglevels available (don't change!)
@ -63,6 +76,7 @@ static const char backupFile[] PROGMEM = "/backup.txt"; // File is written every
uint8_t FS_DEPTH = 5; // Max. recursion-depth of file tree
const char *DIRECTORY_INDEX_FILE = "/files.json"; // Filename of files.json index file
//#################### Settings for optional Modules##############################
// (optinal) Neopixel
#ifdef NEOPIXEL_ENABLE
@ -77,12 +91,6 @@ uint8_t voltageCheckInterval = 10; // How of battery-voltage is
float voltageIndicatorLow = 3.0; // Lower range for Neopixel-voltage-indication (0 leds) (can be changed via GUI!)
float voltageIndicatorHigh = 4.2; // Upper range for Neopixel-voltage-indication (all leds) (can be changed via GUI!)
// (optinal) For measuring battery-voltage a voltage-divider is necessary. Their values need to be configured here.
#ifdef MEASURE_BATTERY_VOLTAGE
uint8_t rdiv1 = 129; // Rdiv1 of voltage-divider (kOhms) (measure exact value with multimeter!)
uint16_t rdiv2 = 389; // Rdiv2 of voltage-divider (kOhms) (measure exact value with multimeter!) => used to measure voltage via ADC!
#endif
// (optinal) Headphone-detection (leave unchanged if in doubts...)
#ifdef HEADPHONE_ADJUST_ENABLE
uint16_t headphoneLastDetectionDebounce = 1000; // Debounce-interval in ms when plugging in headphone

Write Preview
Loading…
Cancel
Save