Torsten Stauder
5 years ago
3 changed files with 158 additions and 126 deletions
-
3README.md
-
128src/main.cpp
-
153src/settings.h
@ -0,0 +1,153 @@ |
|||||
|
#include "Arduino.h" |
||||
|
|
||||
|
//########################## MODULES ################################# |
||||
|
#define MQTT_ENABLE // Make sure to configure mqtt-server and (optionally) username+pwd |
||||
|
#define FTP_ENABLE // Enables FTP-server |
||||
|
#define NEOPIXEL_ENABLE // Don't forget configuration of NUM_LEDS if enabled |
||||
|
#define NEOPIXEL_REVERSE_ROTATION // Some Neopixels are adressed/soldered counter-clockwise. This can be configured here. |
||||
|
#define LANGUAGE 1 // 1 = deutsch; 2 = english |
||||
|
#define HEADPHONE_ADJUST_ENABLE // Used to adjust (lower) volume for optional headphone-pcb (refer maxVolumeSpeaker / maxVolumeHeadphone) |
||||
|
#define SHUTDOWN_IF_SD_BOOT_FAILS // Will put ESP to deepsleep if boot fails due to SD. Really recommend this if there's in battery-mode no other way to restart ESP! Interval adjustable via deepsleepTimeAfterBootFails. |
||||
|
#define MEASURE_BATTERY_VOLTAGE // Enables battery-measurement via GPIO (ADC) and voltage-divider |
||||
|
//#define PLAY_LAST_RFID_AFTER_REBOOT // When restarting Tonuino, the last RFID that was active before, is recalled and played |
||||
|
|
||||
|
//#define SINGLE_SPI_ENABLE // If only one SPI-instance should be used instead of two (not yet working!) |
||||
|
//#define SD_NOT_MANDATORY_ENABLE // Only for debugging-purposes: Tonuino will also start without mounted SD-card anyway (will only try once to mount it). Will overwrite SHUTDOWN_IF_SD_BOOT_FAILS! |
||||
|
//#define BLUETOOTH_ENABLE // Doesn't work currently (so don't enable) as there's not enough DRAM available |
||||
|
|
||||
|
|
||||
|
|
||||
|
//################## GPIO-configuration ############################## |
||||
|
// uSD-card-reader (via SPI) |
||||
|
#define SPISD_CS 15 // GPIO for chip select (SD) |
||||
|
#ifndef SINGLE_SPI_ENABLE |
||||
|
#define SPISD_MOSI 13 // GPIO for master out slave in (SD) => not necessary for single-SPI |
||||
|
#define SPISD_MISO 16 // GPIO for master in slave ou (SD) => not necessary for single-SPI |
||||
|
#define SPISD_SCK 14 // GPIO for clock-signal (SD) => not necessary for single-SPI |
||||
|
#endif |
||||
|
|
||||
|
// RFID (via SPI) |
||||
|
#define RST_PIN 99 // Not necessary but has to be set anyway; so let's use a dummy-number |
||||
|
#define RFID_CS 21 // GPIO for chip select (RFID) |
||||
|
#define RFID_MOSI 23 // GPIO for master out slave in (RFID) |
||||
|
#define RFID_MISO 19 // GPIO for master in slave out (RFID) |
||||
|
#define RFID_SCK 18 // GPIO for clock-signal (RFID) |
||||
|
|
||||
|
// I2S (DAC) |
||||
|
#define I2S_DOUT 25 // Digital out (I2S) |
||||
|
#define I2S_BCLK 27 // BCLK (I2S) |
||||
|
#define I2S_LRC 26 // LRC (I2S) |
||||
|
|
||||
|
// Rotary encoder |
||||
|
#define DREHENCODER_CLK 34 // If you want to reverse encoder's direction, just switch GPIOs of CLK with DT (in software or hardware) |
||||
|
#define DREHENCODER_DT 35 // Info: Lolin D32 / Lolin D32 pro 35 are using 35 for battery-voltage-monitoring! |
||||
|
#define DREHENCODER_BUTTON 32 // Button is used to switch Tonuino on and off |
||||
|
|
||||
|
// Control-buttons |
||||
|
#define PAUSEPLAY_BUTTON 5 // GPIO to detect pause/play |
||||
|
#define NEXT_BUTTON 4 // GPIO to detect next |
||||
|
#define PREVIOUS_BUTTON 2 // GPIO to detect previous (Important: as of 19.11.2020 changed from 33 to 2) |
||||
|
|
||||
|
// (optional) Power-control |
||||
|
#define POWER 17 // GPIO used to drive transistor-circuit, that switches off peripheral devices while ESP32-deepsleep |
||||
|
|
||||
|
// (optional) Neopixel |
||||
|
#define LED_PIN 12 // GPIO for Neopixel-signaling |
||||
|
|
||||
|
// (optinal) Headphone-detection |
||||
|
#ifdef HEADPHONE_ADJUST_ENABLE |
||||
|
#define HP_DETECT 22 // GPIO that detects, if there's a plug in the headphone jack or not |
||||
|
#endif |
||||
|
|
||||
|
// (optional) Monitoring of battery-voltage via ADC |
||||
|
#ifdef MEASURE_BATTERY_VOLTAGE |
||||
|
#define VOLTAGE_READ_PIN 33 // GPIO used to monitor battery-voltage. Change to 35 if you're using Lolin D32 or Lolin D32 pro as it's hard-wired there! |
||||
|
#endif |
||||
|
|
||||
|
|
||||
|
|
||||
|
//#################### Various settings ############################## |
||||
|
// Loglevels available (don't change!) |
||||
|
#define LOGLEVEL_ERROR 1 // only errors |
||||
|
#define LOGLEVEL_NOTICE 2 // errors + important messages |
||||
|
#define LOGLEVEL_INFO 3 // infos + errors + important messages |
||||
|
#define LOGLEVEL_DEBUG 4 // almost everything |
||||
|
|
||||
|
// Serial-logging-configuration |
||||
|
const uint8_t serialDebug = LOGLEVEL_DEBUG; // Current loglevel for serial console |
||||
|
|
||||
|
// Buttons (better leave unchanged if in doubts :-)) |
||||
|
uint8_t buttonDebounceInterval = 50; // Interval in ms to software-debounce buttons |
||||
|
uint16_t intervalToLongPress = 700; // Interval in ms to distinguish between short and long press of previous/next-button |
||||
|
|
||||
|
// RFID |
||||
|
#define RFID_SCAN_INTERVAL 300 // Interval-time in ms (how often is RFID read?) |
||||
|
|
||||
|
// Automatic restart |
||||
|
#ifdef SHUTDOWN_IF_SD_BOOT_FAILS |
||||
|
uint32_t deepsleepTimeAfterBootFails = 20; // Automatic restart takes place if boot was not successful after this period (in seconds) |
||||
|
#endif |
||||
|
|
||||
|
// FTP |
||||
|
// Nothing to be configured here... |
||||
|
// Default user/password is esp32/esp32 but can be changed via webgui |
||||
|
|
||||
|
// Tonuino will create a WiFi if joing existing WiFi was not possible. Name can be configured here. |
||||
|
static const char accessPointNetworkSSID[] PROGMEM = "Tonuino"; // Access-point's SSID |
||||
|
|
||||
|
// Where to store the backup-file for NVS-records |
||||
|
#ifndef SD_NOT_MANDATORY_ENABLE |
||||
|
static const char backupFile[] PROGMEM = "/backup.txt"; // File is written every time a (new) RFID-assignment via GUI is done |
||||
|
#endif |
||||
|
|
||||
|
// (webgui) File Browser |
||||
|
uint8_t FS_DEPTH = 5; // Max. recursion-depth of file tree |
||||
|
const char *DIRECTORY_INDEX_FILE = "/files.json"; // Filename of files.json index file |
||||
|
|
||||
|
// (optinal) Neopixel |
||||
|
#ifdef NEOPIXEL_ENABLE |
||||
|
#define NUM_LEDS 24 // number of LEDs |
||||
|
#define CHIPSET WS2812B // type of Neopixel |
||||
|
#define COLOR_ORDER GRB |
||||
|
#endif |
||||
|
|
||||
|
// (optional) Default-voltages for battery-monitoring via Neopixel |
||||
|
float warningLowVoltage = 3.4; // If battery-voltage is >= this value, a cyclic warning will be indicated by Neopixel (can be changed via GUI!) |
||||
|
uint8_t voltageCheckInterval = 10; // How of battery-voltage is measured (in minutes) (can be changed via GUI!) |
||||
|
float voltageIndicatorLow = 3.0; // Lower range for Neopixel-voltage-indication (0 leds) (can be changed via GUI!) |
||||
|
float voltageIndicatorHigh = 4.2; // Upper range for Neopixel-voltage-indication (all leds) (can be changed via GUI!) |
||||
|
|
||||
|
// (optinal) For measuring battery-voltage a voltage-divider is necessary. Their values need to be configured here. |
||||
|
#ifdef MEASURE_BATTERY_VOLTAGE |
||||
|
uint8_t r2 = 129; // Rdiv1 of voltage-divider (kOhms) (measure exact value with multimeter!) |
||||
|
uint16_t r1 = 389; // Rdiv2 of voltage-divider (kOhms) (measure exact value with multimeter!) => used to measure voltage via ADC! |
||||
|
#endif |
||||
|
|
||||
|
// (optinal) Headphone-detection (leave unchanged if in doubts...) |
||||
|
#ifdef HEADPHONE_ADJUST_ENABLE |
||||
|
uint16_t headphoneLastDetectionDebounce = 1000; // Debounce-interval in ms when plugging in headphone |
||||
|
#endif |
||||
|
|
||||
|
// (optional) Topics for MQTT |
||||
|
#ifdef MQTT_ENABLE |
||||
|
#define DEVICE_HOSTNAME "ESP32-Tonuino" // Name that that is used for MQTT |
||||
|
static const char topicSleepCmnd[] PROGMEM = "Cmnd/Tonuino/Sleep"; |
||||
|
static const char topicSleepState[] PROGMEM = "State/Tonuino/Sleep"; |
||||
|
static const char topicTrackCmnd[] PROGMEM = "Cmnd/Tonuino/Track"; |
||||
|
static const char topicTrackState[] PROGMEM = "State/Tonuino/Track"; |
||||
|
static const char topicTrackControlCmnd[] PROGMEM = "Cmnd/Tonuino/TrackControl"; |
||||
|
static const char topicLoudnessCmnd[] PROGMEM = "Cmnd/Tonuino/Loudness"; |
||||
|
static const char topicLoudnessState[] PROGMEM = "State/Tonuino/Loudness"; |
||||
|
static const char topicSleepTimerCmnd[] PROGMEM = "Cmnd/Tonuino/SleepTimer"; |
||||
|
static const char topicSleepTimerState[] PROGMEM = "State/Tonuino/SleepTimer"; |
||||
|
static const char topicState[] PROGMEM = "State/Tonuino/State"; |
||||
|
static const char topicCurrentIPv4IP[] PROGMEM = "State/Tonuino/IPv4"; |
||||
|
static const char topicLockControlsCmnd[] PROGMEM ="Cmnd/Tonuino/LockControls"; |
||||
|
static const char topicLockControlsState[] PROGMEM ="State/Tonuino/LockControls"; |
||||
|
static const char topicPlaymodeState[] PROGMEM = "State/Tonuino/Playmode"; |
||||
|
static const char topicRepeatModeCmnd[] PROGMEM = "Cmnd/Tonuino/RepeatMode"; |
||||
|
static const char topicRepeatModeState[] PROGMEM = "State/Tonuino/RepeatMode"; |
||||
|
static const char topicLedBrightnessCmnd[] PROGMEM = "Cmnd/Tonuino/LedBrightness"; |
||||
|
static const char topicLedBrightnessState[] PROGMEM = "State/Tonuino/LedBrightness"; |
||||
|
static const char topicBatteryVoltage[] PROGMEM = "State/Tonuino/Voltage"; |
||||
|
#endif |
||||
Write
Preview
Loading…
Cancel
Save
Reference in new issue